Proxmark3 developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2019-07-28 19:55:30

hackmaster
Contributor
Registered: 2019-07-28
Posts: 4

Docker & /dev/ttyACM0 not Found

Hi guys,

I need some helps. I am used to work with pm3 and iceman fork using docker container.
I normally start with:
docker run -it --device="/dev/ttyACM0"  iceman1001/proxmark3:1.7.0
and everythinks worked fine. But now i am receiving this error:
"error gathering device information while adding custom device "/dev/ttyACM0": no such file or directory"

even if the proxmark usb device is successfully attached in VM interface.

I have already formatted the pc and reinstalled windows 10 and docker toolbox (last Version), but, I am receiveng the same error.

This configuration was working like a charm in the past. I cannot understand why.

Could you helpe me on this guys?

Last edited by hackmaster (2019-07-28 19:58:16)

Offline

#2 2019-07-29 19:56:17

hackmaster
Contributor
Registered: 2019-07-28
Posts: 4

Re: Docker & /dev/ttyACM0 not Found

Up

Offline

#3 2019-07-29 21:49:04

iceman
Administrator
Registered: 2013-04-25
Posts: 5,601
Website

Re: Docker & /dev/ttyACM0 not Found

??  if your problem has resolved itsefl,  do take the time to edit your first post and add prefix [solved]  to your title/subject


If you feel the love,  https://www.patreon.com/iceman1001

modhex(hkhehghthbhudcfcdchkigiehgduiehg)

Offline

#4 2019-07-30 06:00:05

hackmaster
Contributor
Registered: 2019-07-28
Posts: 4

Re: Docker & /dev/ttyACM0 not Found

Iceman.. the problem is still going on. Never resolved. I need help.

Offline

Board footer

Powered by FluxBB