Proxmark3 developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2019-08-14 08:23:38

yukihama
Contributor
Registered: 2018-05-13
Posts: 73

unknown tag not readable by pm3

unknown tag not readable by pm3, anyone got any idea about this tag?

I have uploaded the pic of both tag and reader to this link
https://www.sendspace.com/filegroup/B4ObS19vyBL35NomkC7Ne1cAAk4RigHJ

Thanks

Offline

#2 2019-08-14 09:16:20

iceman
Administrator
Registered: 2013-04-25
Posts: 5,675
Website

Re: unknown tag not readable by pm3

Isecurity?   Even if you don't want to show written numbers,   atleast write down the layout of the printed numbers.


If you feel the love,  https://www.patreon.com/iceman1001

modhex(hkhehghthbhudcfcdchkigiehgduiehg)

Offline

#3 2019-08-14 11:52:54

Ollibolli
Contributor
Registered: 2019-04-27
Posts: 25

Re: unknown tag not readable by pm3

What can you do with this tag?

Offline

#4 2019-08-14 12:02:31

yukihama
Contributor
Registered: 2018-05-13
Posts: 73

Re: unknown tag not readable by pm3

iceman wrote:

Isecurity?   Even if you don't want to show written numbers,   atleast write down the layout of the printed numbers.


Thanks Pal,the number under isecurity logo is only a telephone number. but the other side printed a number 134 which I think only a serial number.

This tag is much thicker than other similar look tag. And the reader is white as shown in the pics.


any idea?  No output with any command tried with PM3 easy or PM3 RDV4

Offline

#5 2019-08-14 17:10:41

iceman
Administrator
Registered: 2013-04-25
Posts: 5,675
Website

Re: unknown tag not readable by pm3

hw tune trick,  see which voltage drops.


If you feel the love,  https://www.patreon.com/iceman1001

modhex(hkhehghthbhudcfcdchkigiehgduiehg)

Offline

#6 2019-09-09 20:16:24

Shr
Contributor
Registered: 2019-09-09
Posts: 2

Re: unknown tag not readable by pm3

Also looking for info how to crack this... I've seen exactly the same readers and found some info:

It's GE Security / UTC Fire & Security before it was Aritech
Reader type GE Security CS1700 / Aritech ATS119x
Also found somewhere tags are type: Hitag II Proximity and require 4 digit building code to activate

Reader connects to "TITAN" system, whatever that is.

https://pim.firesecurityproducts.com/sites/default/files/product_leaflet/en-DE/cs1700-1-en-de.pdf
https://www.beveiligingswinkel2.nl/productpdf/brochure_ats1190.pdf

hw tune drops voltage on LF

Any thoughts? Can comms be sniffed having correct card/fob ?

Offline

#7 2019-09-09 20:51:32

iceman
Administrator
Registered: 2013-04-25
Posts: 5,675
Website

Re: unknown tag not readable by pm3

try the LF hitag commands,  with password  (or 4 digit building code)


If you feel the love,  https://www.patreon.com/iceman1001

modhex(hkhehghthbhudcfcdchkigiehgduiehg)

Offline

Board footer

Powered by FluxBB