Proxmark3 community

onebyte

Contributor

Registered: 2017-09-28

Posts: 37

[gallagher] New type of card?

Hi today I tried one thin white card, it is from gallagher company

Not recognized by official fork, not lf not hf
With iceman fork, not hf, looks indala but no id or any other information, maybe wrong information

I think it is new type or something wrong with software. It is thin white card and only serial no on the dace
And gallagher.co domain, maybe from that company nz head office.

Anyone tried it? Nothing more to do

mwalker

Moderator

Registered: 2019-05-11

Posts: 318

Re: [gallagher] New type of card?

Assuming you are running a newer firmware, does this show anything.

lf t55 detect r 4

onebyte

Contributor

Registered: 2017-09-28

Posts: 37

Re: [gallagher] New type of card?

Thanks mwalker, not tried yet,
Will report the result

mwalker

Moderator

Registered: 2019-05-11

Posts: 318

Re: [gallagher] New type of card?

Quick note.  If using the latest rrg/iceman fork the r 4 is now default,
So just lf t55 detect

iceman

Administrator

Registered: 2013-04-25

Posts: 9,537

Website

Re: [gallagher] New type of card?

If you can save a trace file and share that will be helpful.
Also show the "hw tune" output from w/o card and w card over the antennas.

lf read
data save gallagher_1byte.pm3
hw tune

onebyte

Contributor

Registered: 2017-09-28

Posts: 37

Re: [gallagher] New type of card?

Hi, today I tried it again, same result. and failed, maybe

This case is same as another post :
http://www.proxmark.org/forum/viewtopic.php?id=5806

I do not know he succeeded or failed,

lf t5 detect
lf t5 config
lf t5 dump

then put blank t55

lf t5 write b 0 d xxxxxxxx
lf t5 write b 1 d xxxxxxxx
...
lf t5 write b 7 d xxxxxxxx

like him... but with written blank

lf t5 dump

totally different result not tried cloned one.

I captured hw tune and lf t5 detect, config, info... maybe no need for others, need? how can I attach dumped image or saved file?

Last edited by onebyte (2019-09-28 06:04:12)

mwalker

Moderator

Registered: 2019-05-11

Posts: 318

Re: [gallagher] New type of card?

@onebyte
for the simple text copy from the commands, you can just post here, but put between the  (no spaces inside the square brackets)
use the preview to test

[ code ]

[ / code]

this should result in this example

[usb] pm3 --> lf t55 det
    Chip Type      : T55x7
    Modulation     : ASK
    Bit Rate       : 2 - RF/32
    Inverted       : No
    Offset         : 32
    Seq. Term.     : Yes
    Block0         : 0x000880E0
    Downlink Mode  : default/fixed bit length

[usb] pm3 -->

For the trace files use an upload services and provide a link to the uploaded file.

onebyte

Contributor

Registered: 2017-09-28

Posts: 37

Re: [gallagher] New type of card?

Sorry mwalker

I already captured and dumped but no card at the moment so please leave me your email, I will send it

Or have to put it somewhere on the web and make a link thanks

mwalker

Moderator

Registered: 2019-05-11

Posts: 318

Re: [gallagher] New type of card?

You can use a free service to upload the files.
e.g. https://www.sendspace.com/
With no account the files have a limited life, but generally enough when working on this sort of thing.

then add a link (without the spaces in the tags)

[ url=https://www.sendspace.com/file/fileid]some name[/url ]

onebyte

Contributor

Registered: 2017-09-28

Posts: 37

Re: [gallagher] New type of card?

This is :
lf undefined

Thanks

iceman

Administrator

Registered: 2013-04-25

Posts: 9,537

Website

Re: [gallagher] New type of card?

ASK/MAN  clk 32, 

Autocorrelation of 3072,   gives 12bytes of repeating data.

[usb] pm3 --> da detect a
[+] Auto-detected clock rate: 32, Best Starting Position: 29
[usb] pm3 --> data ra am
00001111111111010101010001100001
10101001110110100001001101000110
10110010110100011010110000110010
00001111111111010101010001100001
10101001110110100001001101000110
10110010110100011010110000110010
00001111111111010101010001100001
10101001110110100001001101000110
10110010110100011010110000110010
00001111111111010101010001100001
10101001110110100001001101000110
10110010110100011010110000110010
00001111111111010101010001100001
10101001110110100001001101000110
10110010110100011010110000110010
00001111111111010101010001100001
[usb] pm3 --> da print x
DemodBuffer: 
0FFD5461 A9DA1346 B2D1AC32
0FFD5461 A9DA1346 B2D1AC32
0FFD5461 A9DA1346 B2D1AC32
0FFD5461 A9DA1346 B2D1AC32
0FFD5461 A9DA1346 B2D1AC32
0FFD5461    

Do you have any printed number on your tag?

onebyte

Contributor

Registered: 2017-09-28

Posts: 37

Re: [gallagher] New type of card?

@iceman
46101005378

onebyte

Contributor

Registered: 2017-09-28

Posts: 37

Re: [gallagher] New type of card?

Any news or info about this? Thanks...

iceman

Administrator

Registered: 2013-04-25

Posts: 9,537

Website

Re: [gallagher] New type of card?

Not really,  you could try the lf gallagher read command on your tag and try start figuring out the FC/CSN decode.

iceman

Administrator

Registered: 2013-04-25

Posts: 9,537

Website

Re: [gallagher] New type of card?

move to 125 kHz section.

onebyte

Contributor

Registered: 2017-09-28

Posts: 37

Re: [gallagher] New type of card?

@iceman did you put new command gallagher? could not find new command, or lf gallagher read? I don't think so...

Thanks.

iceman

Administrator

Registered: 2013-04-25

Posts: 9,537

Website

Re: [gallagher] New type of card?

yup,   its in RRG/Iceman repo... compile / flash and enjoy