Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2019-08-14 08:23:38
- yukihama
- Contributor
- Registered: 2018-05-13
- Posts: 133
unknown tag not readable by pm3
unknown tag not readable by pm3, anyone got any idea about this tag?
I have uploaded the pic of both tag and reader to this link
https://www.sendspace.com/filegroup/B4ObS19vyBL35NomkC7Ne1cAAk4RigHJ
Thanks
Offline
#2 2019-08-14 09:16:20
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: unknown tag not readable by pm3
Isecurity? Even if you don't want to show written numbers, atleast write down the layout of the printed numbers.
Offline
#3 2019-08-14 11:52:54
- Ollibolli
- Contributor
- Registered: 2019-04-27
- Posts: 51
Re: unknown tag not readable by pm3
What can you do with this tag?
Offline
#4 2019-08-14 12:02:31
- yukihama
- Contributor
- Registered: 2018-05-13
- Posts: 133
Re: unknown tag not readable by pm3
Isecurity? Even if you don't want to show written numbers, atleast write down the layout of the printed numbers.
Thanks Pal,the number under isecurity logo is only a telephone number. but the other side printed a number 134 which I think only a serial number.
This tag is much thicker than other similar look tag. And the reader is white as shown in the pics.
any idea? No output with any command tried with PM3 easy or PM3 RDV4
Offline
#5 2019-08-14 17:10:41
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: unknown tag not readable by pm3
hw tune trick, see which voltage drops.
Offline
#6 2019-09-09 20:16:24
- Shr
- Contributor
- Registered: 2019-09-09
- Posts: 2
Re: unknown tag not readable by pm3
Also looking for info how to crack this... I've seen exactly the same readers and found some info:
It's GE Security / UTC Fire & Security before it was Aritech
Reader type GE Security CS1700 / Aritech ATS119x
Also found somewhere tags are type: Hitag II Proximity and require 4 digit building code to activate
Reader connects to "TITAN" system, whatever that is.
https://pim.firesecurityproducts.com/si … -en-de.pdf
https://www.beveiligingswinkel2.nl/prod … ts1190.pdf
hw tune drops voltage on LF
Any thoughts? Can comms be sniffed having correct card/fob ?
Offline
#7 2019-09-09 20:51:32
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: unknown tag not readable by pm3
try the LF hitag commands, with password (or 4 digit building code)
Offline
#8 2019-10-29 14:37:27
- NYCity25
- Contributor
- From: Mars
- Registered: 2018-08-19
- Posts: 31
Re: unknown tag not readable by pm3
easy one
Offline
#9 2019-11-03 13:49:49
- yukihama
- Contributor
- Registered: 2018-05-13
- Posts: 133
Re: unknown tag not readable by pm3
easy one
any hints or command do u play?
please kindly help make this done.
Thanks bro
Offline
#10 2019-11-13 06:11:25
- yukihama
- Contributor
- Registered: 2018-05-13
- Posts: 133
Re: unknown tag not readable by pm3
easy one
HI Dear NYCIty24,any hints or command do u play?
please kindly help make this done Thanks Pal
Offline
Pages: 1