Proxmark3 developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2019-11-23 14:25:47

Mercix
Contributor
Registered: 2019-09-27
Posts: 12

Debugging Timing

Hello,

I'm still developing at Hitag 1 (125 kHz) functions.
Until now the card is answering for uid request and sends after selecting the configuration page.

But the whole comm is very fragile and I noticed, that the Dbprintf-Call seems to interrupt the whole timing.

So my question is, is their a possibility to log timings and print them after the main loop?

Also I've noticed that their a timing functions (GetCountUS()) for time measure.
Is their also a well-tested function for detecing rising/fallling edges?

Thank you.

Greetings,
Mercix

Offline

#2 2019-11-24 12:47:06

iceman
Administrator
Registered: 2013-04-25
Posts: 5,941
Website

Re: Debugging Timing

you could try and use the  tracelog functions,


If you feel the love,  https://www.patreon.com/iceman1001

modhex(hkhehghthbhudcfcdchkigiehgduiehg)

Offline

Board footer

Powered by FluxBB