Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2019-12-07 02:48:56
- zhovner
- Contributor
- From: Russia, Moscow
- Registered: 2014-06-17
- Posts: 15
- Website
Flipper Zero — Multi-tool Device for pentesters
I would like to introduce my new project — Flipper Zero https://flipperzero.one
It's a Tamagotchi-alike multi-tool device based on Raspberry Pi Zero and inspired by pwnagotchi project. This is an attempt to make a fully autonomous device that can be used without computer or smartphone, and controlled directly from built-in LCD display and buttons.
Features:
433 MHz range support (CC1111)
125 kHz RFID reader/writer/emulator
iButton 1-Wire reader/writer/emulator
NFC reader/writer (NXP PN532)
Low power MCU for Always-On mode
Tamagotchi mode
It's just a concept yet, and device is under development right now, so final look and features may change. I would like to hear your opinion and invite developers to join us. Project will be fully open sourced.
Last edited by zhovner (2019-12-07 02:50:48)
Offline
#2 2019-12-08 15:01:09
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: Flipper Zero — Multi-tool Device for pentesters
Cool concept!
Offline