Proxmark3 community

rogerjerry

Contributor

Registered: 2019-10-14

Posts: 6

[SOLVED] [RDV2] Unusable iceman client in arch linux

I have a proxmark3 RDV2 and have compiled the iceman fork inside an arch linux using the following Makefile.platform

PLATFORM=PM3OTHER

When writing the image i have first upgraded the bootloader and then the main firmware.
When I run the client i am stuck in the following prompt:

[=] Waiting for Proxmark3 to appear...

          
  ██████╗ ███╗   ███╗ ████╗            
  ██╔══██╗████╗ ████║   ══█║           
  ██████╔╝██╔████╔██║ ████╔╝           
  ██╔═══╝ ██║╚██╔╝██║   ══█║     iceman@icesql.net          
  ██║     ██║ ╚═╝ ██║ ████╔╝    https://github.com/rfidresearchgroup/proxmark3/          
  ╚═╝     ╚═╝     ╚═╝ ╚═══╝  pre-release v4.0          
          
[=] Session log /home/asterio/.proxmark3/log_20191227.txt
[=] Using UART port /dev/ttyACM0           
[=] Communicating with PM3 over USB-CDC           
qt5ct: using qt5ct plugin

What shall I do to get some insight ?
Is it a problem with the qt5ct ui ?

Last edited by rogerjerry (2019-12-28 14:38:49)

iceman

Administrator

Registered: 2013-04-25

Posts: 9,538

Website

Re: [SOLVED] [RDV2] Unusable iceman client in arch linux

By the looks of it,  its QT5 related.  Never seen  it before.  Sometimes ppl has issues with the Theme.

rogerjerry

Contributor

Registered: 2019-10-14

Posts: 6

Re: [SOLVED] [RDV2] Unusable iceman client in arch linux

Where can I find more information on this topic?

rogerjerry

Contributor

Registered: 2019-10-14

Posts: 6

Re: [SOLVED] [RDV2] Unusable iceman client in arch linux

It worked using:

 sudo ./pm3 

Has anybody experienced any security issue after running this as su

Last edited by rogerjerry (2019-12-28 14:39:18)