Proxmark3 developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2020-01-10 20:24:12

Devang
Contributor
Registered: 2020-01-07
Posts: 8

Proxmark 3 elehouse

Hi Peers,

I am trying to clone LF125khz casi PL5 card as the purpose of security testing.I have tried using standalone mode but it is not reading this card Below is a link for details of the card. Any other firmware /flash can help to read this card then let me know and to upgrade it.

https://www.id-enhancements.com/rapidprox-proxlite-card-for-casi-compare-to-cxpl5/#product-tab-description.

Any suggestion to clone this card would be really helpful. I have windows 10 Dell 64bit laptop and Proxmark 3 RDV2 from elehouse .

There is only numbers I can see on the back of badge which is 154288383797 and badge is embedded with a small copper square in the middle of the card.

I am willing to compensate if you can solve this mystery.

Thanks and let me know if any details required.

Offline

Board footer

Powered by FluxBB