Proxmark3 developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2020-06-23 11:28:28

Auden69
Contributor
Registered: 2020-06-23
Posts: 3

French unkwon tag...

Hello,

It’s a french tag used at my work and i don’t knwo how to deal with…

nfc-list -v
nfc-list uses libnfc 1.7.1
NFC device: ACS / ACR122U PICC Interface opened
1 ISO14443A passive target(s) found:
ISO/IEC 14443A (106 kbps) target:
    ATQA (SENS_RES): 00  04  
* UID size: single
* bit frame anticollision supported
       UID (NFCID1): 45  0a  da  d0  
      SAK (SEL_RES): 00  
* Not compliant with ISO/IEC 14443-4
* Not compliant with ISO/IEC 18092

Fingerprinting based on MIFARE type Identification Procedure:
* SmartMX with MIFARE 1K emulation
Other possible matches based on ATQA & SAK values:
0 Felica (212 kbps) passive target(s) found.
0 Felica (424 kbps) passive target(s) found.
0 ISO14443B passive target(s) found.
0 ISO14443B' passive target(s) found.
0 ISO14443B-2 ST SRx passive target(s) found.
0 ISO14443B-2 ASK CTx passive target(s) found.
0 Jewel passive target(s) found.
nfc-mfclassic r a test.mfd
NFC reader: ACS / ACR122U PICC Interface opened
Warning: tag is probably not a MFC!
Found MIFARE Classic card:
ISO/IEC 14443A (106 kbps) target:
    ATQA (SENS_RES): 00  04  
       UID (NFCID1): 45  0a  da  d0  
      SAK (SEL_RES): 00  
mfoc -O test.dmp
mfoc: ERROR: only Mifare Classic is supported

Any idea ??


Thanks ...

Offline

#2 2020-06-24 17:48:31

fazer
Contributor
Registered: 2019-03-02
Posts: 62

Re: French unkwon tag...

Hello, you are working with an acr122U, here Proxmark3 commands are not the same, there are forums for your hardware.
Good evening.

Offline

Board footer

Powered by FluxBB