Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2020-08-04 23:36:52

target111
Contributor
Registered: 2020-07-20
Posts: 5

Vingcard hotel card - Mifare ultralight

Hello everyone,

I've got my hands on two vingcard ultralight cards from the hotel I'm staying and I've been trying to figure out how the data is stored, particularly the room number.
I don't know which bits from the uid represent the xor mask for the otp and the rest of the data, or if the otp is actually the mask. I've seen some other posts about those types of cards here, but none of them seemed to look the same. These are the only two dumps that I have and they always stay the same, even after using the card (apologies for the limited number of samples).

Offline

#2 2020-08-05 09:44:21

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: Vingcard hotel card - Mifare ultralight

The part where the user data is look encrypted.  Is the system a new system or older?

Offline

#3 2020-08-05 18:22:19

target111
Contributor
Registered: 2020-07-20
Posts: 5

Re: Vingcard hotel card - Mifare ultralight

I think it's an old system, since I couldn't find any image on Google that matches the door lock. There's no info on the cards so all that I can provide is a photo of the lock.

Last edited by target111 (2020-08-05 18:23:25)

Offline

Board footer

Powered by FluxBB