Proxmark3 developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2020-08-18 13:45:57

DenisP
Contributor
Registered: 2020-08-18
Posts: 3

RCI Fob doesn't wake up

Hi, everyone

I'm trying to read this fob

FluxBB bbcode test

https://www.dormakaba.com/us-en/solutio … ers-602862


I tried lf / hf search u. There is no modulation at all. Looks like there must be some sort of wake up sequence.

The tech support says that it should be HID Prox.

Please help.

Offline

#2 2020-08-18 16:38:15

DenisP
Contributor
Registered: 2020-08-18
Posts: 3

Re: RCI Fob doesn't wake up

I can pay for the solution

Offline

#3 2020-08-19 14:10:22

Onisan
Contributor
From: London
Registered: 2016-07-18
Posts: 80

Re: RCI Fob doesn't wake up

Clue.... Hitag2
However, you won’t be able to clone it for that system as it uses the UID for credentials after reading 4 blocks of data.
There are currently no UID changeable Hitag2 chips on the market..

Last edited by Onisan (2020-08-19 14:13:06)


Hardware: Proxmark RV2,  Elatec TWN4 dev kit / ACS ACR122U / IDTronic LF Reader / OmniKey 5321 / HT108 RW / Custom Read Write 125khz RW and a couple of other RW bits.

Offline

#4 2020-08-19 14:15:16

iceman
Administrator
Registered: 2013-04-25
Posts: 6,648
Website

Re: RCI Fob doesn't wake up

... one of these days,  the pm3 will simulate it well.   
...meanwhile I think rfidler does a good job at it.


If you feel the love,  https://www.patreon.com/iceman1001

modhex(hkhehghthbhudcfcdchkigiehgduiehg)

Offline

Board footer

Powered by FluxBB