Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2020-08-20 21:48:02

Appellus
Contributor
Registered: 2020-08-17
Posts: 8

JTag Clone

I'm wondering if anyone has any luck with using this style of debugger/would it even be possible to use this to clear errored sector on a PM3 512 easy?

Product

The Error in Question

Last edited by Appellus (2020-08-20 21:48:18)

Offline

#2 2020-08-21 01:27:03

mwalker
Moderator
Registered: 2019-05-11
Posts: 318

Re: JTag Clone

I not really know, but am interested.
I expect that you will need some software to send the commands and files that can support the chip types.
You may also still need to the jtag adapters to match your proxmark.

I have the j-link, but see there is also the j-link mini (e.g. https://www.amazon.com/Segger-J-Link-EDU-mini-Debugger/dp/B0758XRMTF)
While I have not used the mini, I expect it would with with the same j-link software (free download)

Offline

Board footer

Powered by FluxBB