Proxmark3 developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2020-09-13 23:23:56

DzKmAn
Contributor
Registered: 2020-09-01
Posts: 6

Help me Update firmware FPGA

Hi, i'm newbie

I want to update the FPGA firmware


██████╗ ███╗   ███╗ ████╗     ...iceman fork
██╔══██╗████╗ ████║   ══█║
██████╔╝██╔████╔██║ ████╔╝
██╔═══╝ ██║╚██╔╝██║   ══█║    iceman@icesql.net
██║     ██║ ╚═╝ ██║ ████╔╝  https://github.com/iceman1001/proxmark3
╚═╝     ╚═╝     ╚═╝ ╚═══╝ v3.1.0

Keep iceman fork alive with a donation!           https://paypal.me/iceman1001/
MONERO: 43mNJLpgBVaTvyZmX9ajcohpvVkaRy1kbZPm8tqAb7itZgfuYecgkRF36rXrKFUkwEGeZedPsASRxgv4HPBHvJwyJdyvQuP



Proxmark3 RFID instrument
         

[ CLIENT ]         
client: iceman build for RDV40 with flashmem; smartcard; 
         
[ ARM ]
bootrom: iceman/master/ice_v3.1.0-1097-ga23414fe 2020-09-02 23:36:20
      os: iceman/master/ice_v3.1.0-1097-ga23414fe 2020-09-02 23:36:23

[ FPGA ]
LF image built for 2s30vq100 on 2017/10/25 at 19:50:50
HF image built for 2s30vq100 on 2018/ 9/ 3 at 21:40:23         

[ Hardware ]           
  --= uC: AT91SAM7S512 Rev B         
  --= Embedded Processor: ARM7TDMI         
  --= Nonvolatile Program Memory Size: 512K bytes, Used: 235732 bytes (45%) Free: 288556 bytes (55%)         
  --= Second Nonvolatile Program Memory Size: None         
  --= Internal SRAM Size: 64K bytes         
  --= Architecture Identifier: AT91SAM7Sxx Series         
  --= Nonvolatile Program Memory Type: Embedded Flash Memory

Last edited by DzKmAn (2020-09-13 23:26:28)

Offline

#2 2020-09-14 04:47:23

iceman
Administrator
Registered: 2013-04-25
Posts: 6,648
Website

Re: Help me Update firmware FPGA

that is an old fw/client you installed.

Try the release here instead https://github.com/RfidResearchGroup/pr … ag/v4.9237


If you feel the love,  https://www.patreon.com/iceman1001

modhex(hkhehghthbhudcfcdchkigiehgduiehg)

Offline

#3 2020-09-14 09:05:01

DzKmAn
Contributor
Registered: 2020-09-01
Posts: 6

Re: Help me Update firmware FPGA

thank you so much

I redo the complete installation or just flash the proxmark ?

Offline

#4 2020-09-14 09:18:34

iceman
Administrator
Registered: 2013-04-25
Posts: 6,648
Website

Re: Help me Update firmware FPGA

you should compile/flash-all/run client,   If you look at the repo readme you find different documentation which is useful


If you feel the love,  https://www.patreon.com/iceman1001

modhex(hkhehghthbhudcfcdchkigiehgduiehg)

Offline

#5 2020-09-14 09:44:50

DzKmAn
Contributor
Registered: 2020-09-01
Posts: 6

Re: Help me Update firmware FPGA

excuse me,

I have to uninstall the version of proxmark3 then install proxmark3-v4.9237 or is it another manipulation?

but I can't find the information, I'm newbie

please help me, thank you

Last edited by DzKmAn (2020-09-14 14:37:41)

Offline

#6 2020-09-16 23:20:22

DzKmAn
Contributor
Registered: 2020-09-01
Posts: 6

Re: Help me Update firmware FPGA

Please can you help me please

Offline

Board footer

Powered by FluxBB