Proxmark3 developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2020-09-20 10:40:04

wilecoyote
Contributor
Registered: 2020-09-08
Posts: 2

MSD Standalone mode and reader commands

Hi all,

I've been using a slightly modified hf_msdsal to be able to read my card and extract track 2.

Then, in emulation mode the reader keep sending WAKEUP (0x52) but never send any command to the proxmark.

Did anybody know if timing issue can exist in the response of the proxmark to the WAKEUP ?

Thanks,

Offline

Board footer

Powered by FluxBB