Proxmark3 community

yukihama

Contributor

Registered: 2018-05-13

Posts: 133

unknown command:: 0x61334d50[!!] ERROR: cannot communica

HI,
try iceman folk on kali linux with this unknown error:

iceman@icesql.net          
  ██║     ██║ ╚═╝ ██║ ████╔╝    https://github.com/rfidresearchgroup/proxmark3/          
  ╚═╝     ╚═╝     ╚═╝ ╚═══╝  pre-release v4.0          
          
[=] Session log /root/.proxmark3/log_20191212.txt
[=] Using UART port /dev/ttyACM0           
unknown command:: 0x61334d50[!!] ERROR: cannot communicate with the Proxmark

anyone know why?
ICEMAN folk with RDV2 connected by usb^_^

iceman

Administrator

Registered: 2013-04-25

Posts: 9,538

Website

Re: unknown command:: 0x61334d50[!!] ERROR: cannot communica

... how about make sure to flash the device with the same firmware image that came with your proxmark3 client software?
i.e.  don't mix between client / fw from different sources.

Elsin10

Contributor

Registered: 2018-02-27

Posts: 41

Re: unknown command:: 0x61334d50[!!] ERROR: cannot communica

I'm getting the same error. How can i flash the fw that came with proxmark3 ? Can i download the file somewhere ?
That start to happen after i updated the folders not the proxmark3

My client is Windows

zissilia

Contributor

From: Greece

Registered: 2020-10-12

Posts: 31

Re: unknown command:: 0x61334d50[!!] ERROR: cannot communica

i have the same in win7x64 with go.bat C:\proxmark3\rdv40-64-20201111-eadacd82f53be5880e8bd7555b5d7a80f52ef10f\ but the driver is this
[Version]
Signature="$Windows NT$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%ProviderName%
DriverVer=03/05/2018,1.1.1.0

[MANUFACTURER]
%ProviderName%=DeviceList, NTx86, NTamd64

[DeviceList.NTx86]
%DeviceName%=DriverInstall,USB\VID_9AC4&PID_4B8F
%DeviceName_old%=DriverInstall,USB\VID_2d2d&PID_504d
%DeviceName_easy%=DriverInstall,USB\VID_502d&PID_502d

[DeviceList.NTamd64]
%DeviceName%=DriverInstall,USB\VID_9AC4&PID_4B8F
%DeviceName_old%=DriverInstall,USB\VID_2d2d&PID_504d
%DeviceName_easy%=DriverInstall,USB\VID_502d&PID_502d

[DriverInstall]
include=mdmcpq.inf
CopyFiles=FakeModemCopyFileSection
AddReg=LowerFilterAddReg,SerialPropPageAddReg

[DriverInstall.Services]
include = mdmcpq.inf
AddService = usbser, 0x00000002, LowerFilter_Service_Inst

; This adds the serial port property tab to the device properties dialog
[SerialPropPageAddReg]
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"

[Strings]
ProviderName = "proxmark.org"
DeviceName = "Proxmark3"
DeviceName_old = "Proxmark3 (old)"
DeviceName_easy = "Proxmark3 (easy?)"

in proxmark client from C:\proxmark3\pm3-bin-2.4.0\win32 (client+GUI)
is this when you pout the com [ ARM ]
bootrom: /-suspect 2015-11-04 22:15:34
      os: Version information not available
[ FPGA ]
LF image built for 2s30vq100 on 2018/ 9/ 8 at 13:57:51
HF image built for 2s30vq100 on 2018/ 9/ 3 at 21:40:23         
uC: AT91SAM7S512 Rev A         
Embedded Processor: ARM7TDMI         
Nonvolatile Program Memory Size: 512K bytes. Used: 245529 bytes (47%). Free: 278759 bytes (53%).         
Second Nonvolatile Program Memory Size: None         
Internal SRAM Size: 64K bytes         
Architecture Identifier: AT91SAM7Sxx Series         
Nonvolatile Program Memory Type: Embedded Flash Memory

zissilia

Contributor

From: Greece

Registered: 2020-10-12

Posts: 31

Re: unknown command:: 0x61334d50[!!] ERROR: cannot communica

i install ed in lumbuntu 18.04.5 LTS and i still have this error unknown command:: 0x61334d50   
  ilias@vero-desktop:~/proxmark3$ client/proxmark3 /dev/ttyACM0
[=] Session log /home/ilias/.proxmark3/logs/log_20201120.txt
[=] Using UART port /dev/ttyACM0
[!!] ? ERROR: cannot communicate with the Proxmark
unknown command:: 0x61334d50ilias@vero-desktop:~/proxmark3$

Platform name:     Proxmark3 rdv4
PLATFORM:          PM3RDV4
PLATFORM_SIZE:     512
Platform extras:   No extra selected
Included options:  SMARTCARD FLASH -DRDV4 LF HITAG EM4x50 ISO15693 LEGICRF ISO14443b ISO14443a ICLASS FELICA NFCBARCODE HFSNIFF HFPLOT
Standalone mode:   HF_MSDSAL
===================================================================
MAKE client/all
===================================================================
Client platform:   Linux
GUI support:       QT4 found, enabled (Qt version 4.8.7 in /usr/lib/i386-linux-gnu)
native BT support: Bluez not found, disabled
Jansson library:   system library found
Lua library:       system library found
Python3 library:   Python3 not found, disabled
Readline library:  enabled
Whereami library:  system library not found, using local library
Lua SWIG:          wrapper found
compiler version:  gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0

1984.495711] usb 3-2: Manufacturer: proxmark.org
[ 1984.495713] usb 3-2: SerialNumber: iceman
[ 1986.288009] cdc_acm 3-2:1.0: ttyACM0: USB ACM device
[ 1986.290516] usbcore: registered new interface driver cdc_acm
[ 1986.290519] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

i will make update the linux and will try again  what can do??????

fazer

Contributor

Registered: 2019-03-02

Posts: 156

Re: unknown command:: 0x61334d50[!!] ERROR: cannot communica

Good evening Zissilia, have you tried with minicom, try to configure your recognized port ttyACM0: USB ACM device, make a backup of the parameters before closing then try to connect with your pm3. I don't know for you if this can help you, but for me it worked, since I have no more problems I am on Ubuntu 20.04.
Good night

zissilia

Contributor

From: Greece

Registered: 2020-10-12

Posts: 31

Re: unknown command:: 0x61334d50[!!] ERROR: cannot communica

thanks  am sorry i have other problem,  i tried to flash the proxmark3 rdv from rdv40-64-20201119-  to
pm3-bin r763 ( becose is more easy for me to sent commands from there )and after this  is not appear to any com port  i try it in linux the same   the leds A and C are on and they blinks  i tryed to make all the flash and  dint respond the boot loader is stuck now what i do ? if i wait until the next day i will be fix ? or i must order the STLink V2 ? i tried to connect  with presed button but the a & c leds are on and some times blink nothing Change and i have e lot of sterss

Last edited by zissilia (2020-11-24 19:33:11)

fazer

Contributor

Registered: 2019-03-02

Posts: 156

Re: unknown command:: 0x61334d50[!!] ERROR: cannot communica

Hello, if the leds are on you have to make a jtag, I used J-link with proxgrind adapter. In your proxmark3 folder there is the recovery / proxmark3_recovery.bin file.
Good luck, good afternoon.
There are tutorials to make a jtag with raspberry pi & pirate bus v3 because v4 is not possible.

Last edited by fazer (2020-11-25 15:29:07)

zissilia

Contributor

From: Greece

Registered: 2020-10-12

Posts: 31

Re: unknown command:: 0x61334d50[!!] ERROR: cannot communica

thanks man  for help but i have 2 questions :
i see how you doing with ST-Link V2 ( http://wiki.yobi.be/wiki/Proxmark )  but me i need the to flash this version C:\proxmark3\pm3-bin-756  (cdc+lua)\pm3-bin-756\firmware_win
there it have many images  fullimage.elf  ,fpgaimage.elf, osimage.elf  and in  \pm3-bin-756\firmware_win\bootrom   folder bootrom.elf

question 1
what is difference of ,fpgaimage.elf, osimage.elf, fullimage.elf  i use the fullimage.elf ?for full image  and bootrom.elf for  boot ?
question 2.
the elf files  they supported  with telenet only  or i can convert  to bin?

is more easy for me to use the proxmark3 rdv4 with proxmark tool couse i am beginner to commands ,than to use the precompile software and drivers like rdv40-64-20201119

Last edited by zissilia (2020-11-25 16:15:27)

fazer

Contributor

Registered: 2019-03-02

Posts: 156

Re: unknown command:: 0x61334d50[!!] ERROR: cannot communica

Re, is your proxmark3 rdv4 original ?, because with J-link interface you just need to inject the recovery file & then with git hub to update the latest version. ex:
git clone https://github.com/RfidResearchGroup/proxmark3.git
cd proxmark3
git pull
make clean && make all
./pm3-flash-all.
If your proxmark & a clone then I can't help you because I don't have a clone.
Good evening.

Last edited by fazer (2020-11-25 16:53:18)

zissilia

Contributor

From: Greece

Registered: 2020-10-12

Posts: 31

Re: unknown command:: 0x61334d50[!!] ERROR: cannot communica

yes is original i get it 2 months ago and i try to learn ,when i manage to work  in windows i use it this driver pm3-bin-2.4.0 is old for pm3 but  is easy for some coblex commands are eazi to do,
the secont time i installed to linux  i flash it  from github as instructions on forum github and it work with linux and rdv40-64-20201119- and windows 7 & 10 client but not with client in  pm3-bin-2.4.0 proxmark3 tool so i deside to go to newer version pm3-bin r763 but  i flash only the boot loader i thing it was mistake i shuld flash all

fazer

Contributor

Registered: 2019-03-02

Posts: 156

Re: unknown command:: 0x61334d50[!!] ERROR: cannot communica

Hello, yes I flash everything, watch the command ./pm3-flash-all.
Good luck & good day.