Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2021-08-14 19:13:27
- DzKmAn
- Contributor
- Registered: 2020-09-01
- Posts: 9
lf em 4x50 chk failed
hello everyone,
I have a problem when I launch the command lf em 4x50 chk
[usb] pm3 --> lf em 4x50 chk
[!] no flash memory available
[usb] pm3 --> lf em 4x50 chk -f my.dic
[!] no flash memory available
[usb] pm3 -->
can you help me
Offline
#2 2021-08-14 23:42:53
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: lf em 4x50 chk failed
..do you have a RDV4 ?
Offline
#3 2021-08-15 10:36:14
- DzKmAn
- Contributor
- Registered: 2020-09-01
- Posts: 9
Re: lf em 4x50 chk failed
non PM3 easy generic
Offline
#4 2021-08-15 10:48:29
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: lf em 4x50 chk failed
makes sense, you seem to be running fw/client compiled for RDV4, rather than the PM3GENERIC platform.
There are clear instructions on the RRG/Iceman repo how to resolve it. Or if you are using the pre-compiled binaries from proxmarkbuilds, select the right ones.
Offline
Pages: 1