Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2021-11-10 16:17:10

Burak
Contributor
Registered: 2021-10-06
Posts: 16

[solved] clone mifare card to CUID or UID card but reader do not react

Hello,

I cloned a hotel mifare card to a UID card and CUID card but none of them worked. Reader do not react. I attached both bin files both are same but only original one in the card works. What can be the reason and what can I do to make it work? Thanks,


Original tag:
FluxBB bbcode test

Cloned tag:
FluxBB bbcode test

UPDATE:
I realised card has two chips but it only uses low frequency chip. I do not think it uses HF chip. So I need to target to LF chip.

Last edited by Burak (2021-11-18 19:42:09)

Offline

#2 2021-12-01 13:45:17

isomail07
Contributor
Registered: 2020-11-16
Posts: 4

Re: [solved] clone mifare card to CUID or UID card but reader do not react

Hi Burak, i see that you are new to Proxmark, i live in Turkey too, maybe i can help with your basic questions.

Offline

#3 2021-12-18 12:23:04

Burak
Contributor
Registered: 2021-10-06
Posts: 16

Re: [solved] clone mifare card to CUID or UID card but reader do not react

isomail07 wrote:

Hi Burak, i see that you are new to Proxmark, i live in Turkey too, maybe i can help with your basic questions.

Hey isomail07, I just seen your message. I will be happy if you can help. Thanks,

Offline

Board footer

Powered by FluxBB