Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Dear users,
We started a new initiative, it is called: libnfc
This is a open source NFC Device library that supports Linux, Mac OS X and Windows.
The library currently works out of the box with the cheap ACS ACR122 NFC Reader.
It is very convenient to have this low-level control of a reader when testing your proxmark.
libnfc provides the following features for easy NFC application development:
* Complete coverage of low-level PN5xx chipset commands
* Written in pure and plain c for portability and speed
* Easy to use programmers API for simple and advanced features
* Released under the open source GNU/GPL licence
* Compatible with very cheap but advanced NFC hardware
* Compiles “out of the box” on Linux, Mac OS X and Windows
* Does not require any knowledge of RFID 13.56mhz modulation
* Supports ISO14443 A/B, ISO18092 and Felica (JIS X 6319-4) protocol
* Can chance your NFC device into a reader or target (tag)
* Allows complete control of the transmitted data frames
* Can leave out or send incorrect CRC bytes
* Provides a way to send arbitrary parity bits
* Allows configuration of advanced chip registers
* Very useful for doing research on hardware and protocol level
* Easy start-up example applications/tools for a quick start
If you are interested, you can check it out here: http://www.libnfc.org
Best regards,
Last edited by rule (2009-02-20 08:06:50)
Offline