Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2022-08-17 14:59:30

Churro
Contributor
Registered: 2022-04-16
Posts: 4

Blueshark COM Port Error

Hello!

So I've recently been utilizing my BlueShark module for short range sniffing of reader and card interactions. While my Windows 10 PC has successfully paired my BlueShark module, the outgoing COM4 port often errors on the proxmark client. Here's a shot of my logs showing the connection error.

[+] loaded from JSON file C:\Users\Isaac\Desktop\RFID-Research\Package-Extractions\ProxSpace-master\pm3/.proxmark3/preferences.json
[=] Using UART port COM4

[!] ERROR: invalid serial port COM4

[?] Try the shell script `./pm3 --list` to get a list of possible serial ports

I continuously receive this error and am unable to connect my Proxmark3 RDV4.01 with the BlueShark module. I'm on the latest Iceman firmware (as of last night 08/16/2022 @ 10PM CDT). There's approximately a 1% chance where the Proxmark will successfully connect, but that's it. Any ideas?

And yes, I'm aware of the HC-06 USB Bluetooth dongle, but the only in-stock supplier is Lab401 and their shipping costs as much as the item itself. So I'm not interested in that right now.

Offline

Board footer

Powered by FluxBB