Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2021-05-22 10:53:13

ouiouioui
Contributor
Registered: 2021-05-19
Posts: 3

vigic comelit tag writed when scanned

Hello,

i use proxmark since some years, thanks for all your work it's impressive!
I have changed my interphone by a vigik/comelit and i tried copy tag.
It come with a new protection system at every scan it write random data in one sector (2byte changed)
so if i copy one, if i scan the copy work but original not anymore.

so i thinked something, can we blok writing of one sector or full tag?
if reader verify writing maybe he accept tag again if not changed? Anyone tried this?

Thanks for your help

Offline

#2 2023-01-14 14:37:46

ouiouioui
Contributor
Registered: 2021-05-19
Posts: 3

Re: vigic comelit tag writed when scanned

Hello,

i was always searching for a solution of a card where block can be writed only once not only the block 0 like FUID

UFUID we can block writing on all block or only 0?

Thanks for your help

Offline

Board footer

Powered by FluxBB