hf mf sim command doesn't work

henry74918 · 2011-10-18 15:44:33

hello
I'm new to proxmark3.
When I try to use "hf mf sim" command
it seems not work for me.

Is this command be well implemented?
Can proxmark3 simulate mifare class 1K perfectly?

thanks for your reply

jonor · 2011-10-22 21:56:29

For me doesn't work only the authentication. I can read blocks without problem. I don't know if write block works.

henry74918 · 2011-10-24 11:38:48

can you tell me how you successfully read blocks from mifare simulation?
I use two proxmark3 for testing,
one for mifare simulation, the other for reader action
I can't read tag ID by using "hf 14a reader"

merlok · 2011-11-04 13:00:01

http://www.proxmark.org/forum/viewtopic.php?id=873
(

henry74918 · 2011-11-07 08:13:14

merlok wrote:

http://www.proxmark.org/forum/viewtopic.php?id=873
(

thanks for the reply
I'll see if it is a timing issue

Proxmark3 community

Announcement

#1 2011-10-18 15:44:33

hf mf sim command doesn't work

#2 2011-10-22 21:56:29

Re: hf mf sim command doesn't work

#3 2011-10-24 11:38:48

Re: hf mf sim command doesn't work

#4 2011-11-04 13:00:01

Re: hf mf sim command doesn't work

#5 2011-11-07 08:13:14

Re: hf mf sim command doesn't work

Board footer