Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2009-01-16 16:23:35

doob
Member
Registered: 2008-07-21
Posts: 15

Proxmark3.com - my new board just arrived :)

I reserved a Proxmark back in December, it was ready at the start of January - made a paypal payment and it was dispatched same day.

Got it this morning (international mail) and it's well put together - works great and pre-flashed so no inital JTAG shenanigans.

Highly recommended - thanks JR!

smile

Offline

#2 2009-01-18 14:08:42

doob
Member
Registered: 2008-07-21
Posts: 15

Re: Proxmark3.com - my new board just arrived :)

And here it is, now encapsulated in two chopped down business-card holders with both the LF & HF antenna taped to the top of the box (they didn't like being sat underneath the proxmark PCB.)

proxmark3.JPG

Reads lf & hf happily, no problems so far with MiFare, HID LF, and an iClass-like card.

# LF antenna @  27 mA / 34912 mV [1273 ohms] 125Khz
# LF antenna @  18 mA / 21752 mV [1187 ohms] 134Khz
# HF antenna @  61 mA / 14340 mV [235 ohms] 13.56Mhz

I was getting about 30v at both LFs until I strapped the antenna down.

Now to get to work on code updates, has anyone thought about taking the ISO 15693 support any further?

Last edited by doob (2009-01-18 14:09:17)

Offline

#3 2009-01-18 15:02:00

proxcat
Contributor
Registered: 2008-11-28
Posts: 62
Website

Re: Proxmark3.com - my new board just arrived :)

Awesome enclosure smile

Offline

#4 2009-02-07 15:48:47

proxcat
Contributor
Registered: 2008-11-28
Posts: 62
Website

Re: Proxmark3.com - my new board just arrived :)

The device is powered via USB.

Offline

#5 2009-02-22 16:54:43

proxcat
Contributor
Registered: 2008-11-28
Posts: 62
Website

Re: Proxmark3.com - my new board just arrived :)

Sale! Two fully functional boards in stock with faulty yellow LEDs. At $449 each these won't last long. Contact sales [2at3] proxmark3.com to order.

Offline

#6 2009-03-22 15:54:41

touf
Contributor
Registered: 2008-12-11
Posts: 27

Re: Proxmark3.com - my new board just arrived :)

i've get a board from Jr at ProxmarkIII,
it was shipped very fast and everything seems ok.

i'm still not getting anything with my 13.56MHz tags but i'm sure that it comes from my part.

i do recommend proxmark3.com !

Offline

Board footer

Powered by FluxBB