Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2024-10-04 10:08:53

bshh
Contributor
Registered: 2024-09-16
Posts: 4

Setting DSFID

Hi

I am trying to set the DSFID but not getting any response from the card

pm3 --> hf 15 raw -ac -d 6229922E0E03530104E001

Card info is working:

[=] --- Tag Information ---------------------------
[+] UID....... E0 04 01 53 03 0E 2E 92
[+] TYPE...... NXP (Philips); IC SL2 ICS2002/ICS2102 ( SLIX )
[+] SYSINFO... 00 0F 92 2E 0E 03 53 01 04 E0 00 00 1B 03 01
[+] DSFID..... 0x00
[+] AFI....... 0x00
[+] IC ref.... 0x01
[+] Tag memory layout (vendor dependent)
[+]     4 ( or 3 ) bytes/blocks x 28 blocks
[+]     112 total bytes

Offline

#2 2024-10-04 18:55:45

fazer
Contributor
Registered: 2019-03-02
Posts: 156

Re: Setting DSFID

Hi, check hf 15 raw -h .

Offline

Board footer

Powered by FluxBB