Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Hello, I understand how to solve my problem with proxmark (http://proxmark.org/forum/viewtopic.php?id=1374), I can't good compiling source and , so, my upgrading firmware doesn't work correctly, so when I update device to r486 (I had downloaded some times ago) which was ready compiling, I get:
Connected units:
1. SN: ChangeMe [bus-0/\\.\libusb0-0001--0x9ac4-0x4b8f]
proxmark3> hw version
#db# Prox/RFID mark3 RFID instrument
#db# bootrom: svn 486-unclean 2011-07-09 19:59:31
#db# os: svn 486-unclean 2011-07-09 19:59:31
#db# FPGA image built on 2009/12/ 8 at 8: 3:54
proxmark3>
When I use hf mf mifare, par() was zeros, however ks() was ok, found key was ok too (without 0000 at the end).
so I think the problem with my compiling. Please, somebody send me really work, compiling, update revision.
Thanks a lot.
Offline
Pages: 1