Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2013-08-15 15:20:57
- uncleunvoid
- Member
- Registered: 2013-08-15
- Posts: 2
Arduino/Electric IMP project with our internal security cards
I am working on an internal project to play with the cards. I used a simple RFDI reader component and it didn't read them I guess because of security setup of the cards?
We have 125Khz cards produced by indala using the legacy scanner.
How easy is it to read those with an arduino and a simple rfid reader component: http://proto-pic.co.uk/125khz-rfid-module-uart/
I tried myself but failed so far.
Whats the easiest setup I could get to be able to read the cards onto the IMP/arduino?
Any help VERY welcome 
Offline
#2 2013-08-15 21:47:39
- 0xFFFF
- Administrator
- From: Vic - Australia
- Registered: 2011-05-31
- Posts: 632
Re: Arduino/Electric IMP project with our internal security cards
Please don't duplicate post.
Offline
#3 2013-08-26 22:08:22
- en4rab
- Contributor
- Registered: 2013-04-22
- Posts: 36
Re: Arduino/Electric IMP project with our internal security cards
The RFID module you link to probably wont work with indala cards as they use PSK modulation, I havent seen any arduino projects designed to decode PSK data.
Offline