Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2014-05-08 11:57:45

Jeff
Member
Registered: 2014-05-07
Posts: 2

About PM3 stand alone possibility

Hi PM3ers,

I'm about to buy a PM3 device and I'm not sure that have well understand if the PM3 device is able in its stand Alone mode  to authenticate for a mifare card and obtain the AR/NR ?

I need help about this ...

Thank you very much

Jeff

Offline

#2 2014-05-09 07:33:34

Jeff
Member
Registered: 2014-05-07
Posts: 2

Re: About PM3 stand alone possibility

Hi,

I'm not really sure that my english is clear enough sorry for that ...

I would like to know if a "reader only attack" could be performed with the PM3 in stand alone mode or a is a PC always needed ...

Thank you

Jeff

Offline

#3 2014-05-09 08:04:51

midnitesnake
Contributor
Registered: 2012-05-11
Posts: 151

Re: About PM3 stand alone possibility

I've only used it with a PC connected.

Offline

#4 2014-05-17 18:52:42

charliex
Contributor
From: Los Angeles/Scotland
Registered: 2010-08-05
Posts: 70
Website

Re: About PM3 stand alone possibility

current pm3 needs a usb connection to a usb host that has the pm3 client, could be an android phone , laptop , etc. you can use use a splitter cable with a usb battery to power it.

you can change the firmware code to do pre defined modes.

Offline

#5 2014-05-19 19:31:46

skappy
Contributor
Registered: 2014-01-13
Posts: 91

Re: About PM3 stand alone possibility

Dear All,

Thank you very much for your help ...

Have a great day

Jeff

Offline

Board footer

Powered by FluxBB