Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2015-08-27 00:05:50

timmyjane
Contributor
Registered: 2015-08-26
Posts: 12

New guy needing guidance on whats next

I am probably pretty far behind the times here but hoping for a little guidance on where to look next in my project. 
I am trying to clone a card.  It is a MiFare Classic 1K.
It is not using any of the default AB keys. 
I am not using a Proxmark just a regular reader as I was told a Proxmark was overkill for just basic cloning.
MFCUK is not finding any keys after running all night.  I read on a thread that if a key isn't found within 2 hours then a key isn't likely to be found.
Am I correct that if I can get one key then MFOC should be able to take care of the remaining.  What should be my next move in this process? 

Thanks for the help.

Offline

#2 2015-08-27 17:54:56

meter
Contributor
Registered: 2015-07-13
Posts: 78

Re: New guy needing guidance on whats next

There are some Mifare 1K Classic where the problem of prng is resolved so dark side attack doesn't work anymore, you can continue to snoop comunication with PM3 and find the keys.

Offline

Board footer

Powered by FluxBB