Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2015-10-14 20:31:12
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
LF AT91C_BASE_SSC->SSC_THR
Question: Why does the assignment of 0x43 do?
I see 0x00, 0xFF on different places in the code, but usaully 0x43 when it comes to LF.. Why?
[== C++ ==]
for(;;) {
if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
AT91C_BASE_SSC->SSC_THR = 0x43;
LED_D_ON();
}
if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
i++;
LED_D_OFF();
if (i >= bufferlength) break;
}
}Offline
Pages: 1