Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2016-05-03 23:57:58
- turusa
- Member
- Registered: 2016-04-29
- Posts: 4
Proxmark3's Tag Timing Setting for Writing ATA5577 Tags
Atmel has a default Tag Timing (duration of gaps, ones, and zeros) configuration for different chips they manufacture. However, an RFID tag's properties also depend on the coil integrated to it. Therefore, it is possible that the Tag Timing of a programmer is not appropriate for reliably writing the tag with On-Off-Keying.
I am wondering how we can set up Tag Timing configuration on the proxmark3 programmer.
Thanks!
Offline
#2 2016-05-04 08:06:50
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: Proxmark3's Tag Timing Setting for Writing ATA5577 Tags
You can change the different timing inside the device code for LF. Which is done to be able to read the very different LF tags the PM3 supports given the latest sourcecode.
Offline