Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2009-08-19 21:45:33

dron
Member
Registered: 2009-08-19
Posts: 4

MIFARE Classic common questions

- What types of attacks to MIFARE Classic keys are present today?

- Is it possible to use another hardware (not proxymark) to trace the log for Crapto? If yes, which?

- Is it possible to get the keys just doing bruteforce attack? How much time approximately do I need and what?

Offline

#2 2009-08-20 01:34:39

phadom
Member
Registered: 2009-03-30
Posts: 14

Re: MIFARE Classic common questions

1) If you look into the files section of the forum you will find all the papers concerning the attacks on Mifare Classic

2)It is possible to use other hardware. One inexpensive solution is OpenPCD and OpenPICC(though it can not even get close to proxmark capabilities) and another expensive solution is CLT Move from Comprion

3)keys are 48bits in size. That means it will take 2^47 tries aprox(^ denotes power) and with the time that it takes for each query u have to forget plain bruteforce attack. Besides with so many attacks why would you go bruteforce it?

Offline

Board footer

Powered by FluxBB