Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2016-08-08 12:38:03
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
[] Unknown glass tag
Unknown glass tag about 1cm long, I've been having this tag laying on my desk for 3years now and now it the LF commands get the signal from it without a problem.
Trace: http://www.icesql.net/proxmark3/traces/glass.txt
It might be a Q5 tag.
ASK/Manchester/64/ STT enabled
but somehow the 'lf t55 detect' doesn't detect it nor can I read it if I configure manually.
Offline
#2 2016-08-09 01:53:15
- ntk
- Contributor
- Registered: 2015-05-24
- Posts: 701
Re: [] Unknown glass tag
"lf se 1 u" does not give me straight statement "Found Sequence Terminator"
Although there is "77" sequence in "rawdemod am"; the rest of data is very strange result "0000000000000000
0000000000000000
0000000000000010
0000000000000000
0000000000000000
0000000000000000
0000000000000000
7710000000000000
0000000000000000
0000000000000000
0000000000000000
0001000000000000
0000000000000000
0000000000000000
0000000000"
Usually with the "77", delimiter, there should be a repeating pattern of "77" and also of its following data
Could the tag be too small for the antenna, Iceman? or it is damping somehow...
Last edited by ntk (2016-08-09 02:01:30)
Offline
Pages: 1