Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2017-01-27 04:48:53
- fidel
- Contributor
- Registered: 2016-10-17
- Posts: 28
G-Prox (32 Bit)
Hi, I have the Id ( Hexadecimal: 527F83E3 ) for a 32 bit G-prox card, how can I use this to clone the card using PM3.
In other word how to get the Raw from this Id, so I can write the Blocks 1 to 4.
Is it possible to Clone a G-prox using Pm3, directly knowing FC & CN
Cheers
Offline
#2 2017-01-27 17:29:46
- Sentinel
- Contributor
- Registered: 2012-11-26
- Posts: 191
Re: G-Prox (32 Bit)
PLS see topic http://www.proxmark.org/forum/viewtopic.php?id=1459
usually G-Prox cards printed decimal number.
you have the number [527F83E3] printed on the card?
Offline
#3 2017-01-27 18:33:55
- Sentinel
- Contributor
- Registered: 2012-11-26
- Posts: 191
Re: G-Prox (32 Bit)
Hexadecimal: 527F83E3
Temic
0 0x00150060
1 0x1BC6E5BC
2 0x6F395817
3 0xB9E81BDF
Offline
#4 2017-01-27 19:20:25
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,506
- Website
Re: G-Prox (32 Bit)
*hm* use the 'lf guard' commands
Offline
#5 2017-01-31 18:11:33
- fidel
- Contributor
- Registered: 2016-10-17
- Posts: 28
Re: G-Prox (32 Bit)
thank you all for your respond,
Sentinel, how did you get the value for block 1,2 and 3.
when I write these blocks, I get the different ID: 8E4D2E5D G prox 32bit.
Iceman : I tried " Lf guard " on my PM3 Does not work, What can cause this,
Thanks for your help
Offline
#6 2017-01-31 19:52:37
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,506
- Website
Re: G-Prox (32 Bit)
...depends on which firmware/client you use...
Offline
#7 2017-01-31 20:34:06
- fidel
- Contributor
- Registered: 2016-10-17
- Posts: 28
Re: G-Prox (32 Bit)
hi Iceman,
I use PM3-bin2.5.0
Can you please let me know if there is a better version that supports Other commands,
Cheers
Offline
#8 2017-01-31 20:55:29
- Sentinel
- Contributor
- Registered: 2012-11-26
- Posts: 191
Re: G-Prox (32 Bit)
for calculate CRC10 I use GROX reader and brute-force attack
Try that: 00000000 (32 bit zero) card
0 0x00150060
1 0x0AD2A4AC
2 0x2B0AC2B0
3 0xAC2B0ADF
Offline
#9 2017-01-31 21:12:42
- fidel
- Contributor
- Registered: 2016-10-17
- Posts: 28
Re: G-Prox (32 Bit)
Hi Sentinel,
I did try it, Again Wrong ID 510A884f comes up.
Offline
#10 2017-01-31 21:29:16
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,506
- Website
Re: G-Prox (32 Bit)
the original thread deals with 26bits,
ref http://www.proxmark.org/forum/viewtopic … 790#p14790
Offline
#11 2017-01-31 23:32:24
- fidel
- Contributor
- Registered: 2016-10-17
- Posts: 28
Re: G-Prox (32 Bit)
Thanks Iceman,
If I may can you help me with the following issue as well,
I am trying to Clone an HID prox II fob as well, the Id that I get from PM#3 search is 9e00001fd4827f000134320 (41360), I think is 84 bit
I use " lf hid clone 9e00001fd4827f000134320 l " to clone it
But when do a "lf search" on the cloned T5577 The read out is 9e9e00001fd4827f000134320 there is an added 9e in the beginning of the new id, what causes this?
Cheers
Offline
#12 2017-02-01 00:08:09
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,506
- Website
Re: G-Prox (32 Bit)
its a preamble thing, which gets added to the clone. So don't add the 0x9e when cloning.
I know, its not very clear and not userfriendly.
Offline
#13 2017-02-01 01:01:53
- fidel
- Contributor
- Registered: 2016-10-17
- Posts: 28
Re: G-Prox (32 Bit)
Thank you,
It Works. I respect you Rfid knowledge.
cheers
Offline
#14 2017-02-01 01:06:01
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,506
- Website
Re: G-Prox (32 Bit)
funny thing is that I notice the same thing for some weeks ago when I was remaking the "wiegand" part and were aiming for a more unified output from 'lf search'. I thought "noone will ever notice since its been there for a long time"... and here you come.
Offline
#15 2017-02-01 03:42:31
- marshmellow
- Contributor
- From: US
- Registered: 2013-06-10
- Posts: 2,302
Re: G-Prox (32 Bit)
it is very rare to find a long hid formatted card. i bet very few if any have actually used that piece of code.
Offline
#16 2017-02-10 00:29:07
- fidel
- Contributor
- Registered: 2016-10-17
- Posts: 28
Re: G-Prox (32 Bit)
Hi Sentinel,
where can i find a GROX reader, or other reader that can be used,
Also i have read about brute-force attack, but a bit confused,
please direct me to right resource regarding this subject.
cheers
Offline
#17 2017-02-10 13:44:10
- Sentinel
- Contributor
- Registered: 2012-11-26
- Posts: 191
Re: G-Prox (32 Bit)
hi Fidel!
I use Mullion arming station G-prox, and Wiegand indicator 
When write to Temic this:
0 0x00150060
1 0x1BC6E5BC
2 0x6F395817
3 0xB9E81BDF
Reader show 527F83E3 (32bit)
G-Prox uses 10-bit polynomial to verify the authenticity of the card
To create the correct card has to go through all the options in 1024
10-bit polynomial remains a mystery
Offline
#18 2017-02-10 15:16:12
- Sentinel
- Contributor
- Registered: 2012-11-26
- Posts: 191
Re: G-Prox (32 Bit)
If U need only copy the card - use proxmark )
Offline
#19 2017-02-10 15:18:34
- Sentinel
- Contributor
- Registered: 2012-11-26
- Posts: 191
Re: G-Prox (32 Bit)
If U want a card number to make it a clone (the original card you do not have), you will need a card reader G-Prox, and a lot of free time, because at card will have to be written Temik 1024 times, and then test them on the reader G-Prox
Offline
#20 2017-02-10 21:32:53
- fidel
- Contributor
- Registered: 2016-10-17
- Posts: 28
Re: G-Prox (32 Bit)
Hi Sentinel,
Thank you for the info,
You mentioned If I need to copy the card use PM3,
Can you please let me know How it is done?
I do not see any command under G-prox
I am using bin-2.5
Can you please clarify the steps needed.
Cheers
Offline
Pages: 1