Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2017-02-10 14:04:22
- bios64
- Contributor
- Registered: 2017-02-10
- Posts: 3
Mifare Classic 1K
Hello everyone,
Yesterday i tried to clone a Mifare 1K into the included M1K that came with the Proxmark3 full kit and now the card won't let me wipe, or write normal sectors but i can read them. Did i mess with something critical? Can i change the UID on the included M1k?
Should i somehow "format" the card?
THank you!
Offline
#2 2017-02-10 14:13:55
- Onisan
- Contributor
- From: London
- Registered: 2016-07-18
- Posts: 88
Re: Mifare Classic 1K
Did you lock the sectors for writing to?
What is the hex dump for the block 3 in each sector?
If you can show them on here someone can check the access rights.
Offline
#3 2017-02-10 17:16:23
- bios64
- Contributor
- Registered: 2017-02-10
- Posts: 3
Re: Mifare Classic 1K
Omg i went full retard. I restored the dump from another mifare and forgot about the dumpkeys.bin file hahahahah.
It is working fine now 
Anyway... Is the UID Changeable on the included M1K?
THanks for the answer bro!
Offline
Pages: 1