Proxmark3 community

Ssany

Contributor

Registered: 2017-03-29

Posts: 13

help cloning G prox ii

hi guys.
I tried to clone G prox II...
I wrote command
lf search u with G prox II fob

G-Prox-II Found: FmtLen 36, Card 21723
Raw: fb1000910c4310f225010b1c

Valid G Prox II ID Found!"

but I dont't have any idea of next steps.....

I found out g prox ii command on the website...
but it didn't work.....
lf gproxii help Y This help
lf gproxii demod Y Demodulate a G Prox II tag from the GraphBuffer
lf gproxii read N Attempt to read and Extract tag data from the antenna

actually I'm beginner on this field.
please let me know next steps...
thank you

Last edited by Ssany (2017-04-22 10:20:16)

ntk

Contributor

Registered: 2015-05-24

Posts: 701

Re: help cloning G prox ii

dont just look for G-prox clone.

That is HID chip type, wiegand, 36bit, that is a very interesting fob/card on your hand... A very good chance for a RFID starter. lots of motivation for you to read a bit more, to go deeper in studying proxmark

there are several ways to clone it. Could help you by giving you only one line... But that is cheap advise, and I would/will feel guilty wasting your opportunity to study an area worthwhile at least one interesting chance to show your quality. once a lifetime. Is it true the English call it a life experience?

Last edited by ntk (2017-04-22 18:10:49)

Ssany

Contributor

Registered: 2017-03-29

Posts: 13

Re: help cloning G prox ii

@ntk
thank you for replying
is there any command for cloning G-prox II????

ntk

Contributor

Registered: 2015-05-24

Posts: 701

Re: help cloning G prox ii

There is.

As I explain before let this fob be your life experience. your motivation. Don't go the easy way, I don't want to spoil your fun.

At first update your PM3 SW and do the read/search again.
Spend some time to read about the wiegand, the awesome basic 26bit, HID, G-prox by then 30 days would have been flying by, and you would come on the solution yourself, that and you know much more.

Do that first, if by 30 days you still need to know the clone command, call here I will give you

Dot.Com

Contributor

From: Hong Kong

Registered: 2016-10-05

Posts: 180

Website

Re: help cloning G prox ii

The answer is right in front of you. If you fully understand how the Gprox works like secura and ioprox, you would know how to fix it.

The command for Gprox is not complete so you got to figure it out the other way.

Like what ntk said. The answer is right in front of you in the raw.