Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
#1 2017-09-16 03:24:42
- DragoNar
- Contributor
- Registered: 2017-09-16
- Posts: 1
Heya Pm3
I'm just a newbie, i want to increase my knowledge about nfc and rfid technologies.
But first i must do this presentation tho.
So, there's not much to know, i have a nfc reader acr122u , and i wanted to know if i can use the proxmarktool "gaucho de la livida palude".
I have to connect it by a serial cable (ROM1) to make it work? or i can do it by only using the usb port
I know that that reader can't do all the processes pm3 can do, but it a good way to start, don't you think=
Ok, i think it's enough to tell.
Thanks for developing such amanzing software/hardware!!!
Offline
#2 2017-09-16 07:46:20
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Heya Pm3
Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.
Offline
Pages: 1
Topic closed