Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2018-02-05 14:07:30
- Onisan
- Contributor
- From: London
- Registered: 2016-07-18
- Posts: 88
ACT EM Marin Fob
So today I had a customer with an ACT EM MArin Fob, Nice and easy
He had two and both had numbers printed on them.
The Hex Data for the Fobs is in the format of 10 Hex Characters,
The first 4 are the Facility code and aren't shown in the number printed on the fob
then next 6 are a direct hex representation of the number with the number padded to 10 places with 0's on the left.
Anyway, supposedly a nice simple copy.
Strangely enough though, neither copies works on the reader yet both copies are exactly the same?
Any suggestions as to why they aren't working on the reader?
Offline
#2 2018-02-05 14:13:01
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: ACT EM Marin Fob
Share the dump / tag data? or trace?
Offline
Pages: 1