Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2018-05-16 19:47:37

Pm3user
Contributor
Registered: 2018-05-16
Posts: 17

Hello Team

Hi Team,
First of all I would like to thank all of you, for the help you are providing over there and for all the knowledge shared.

Let me introduce my self as Iam a kind of noob. I started to learn RFID with ACR12U on HF tags using libnfc on kali-linux for cloning purpose.

Now Iam focusing on low frequency tags still for cloning purpose. this is the main reason why I switched from the ACR12U to a PROXMARK3 using kali.

Iam currently on the installation process. next step will be to learn how to read, emulate and clone a 125khz tag.


I just started to follow the github guide for kali linux ==> https://github.com/Proxmark/proxmark3/wiki/Kali-Linux

almost all the steps were successful except the last one "Upgrading Proxmark3 Firmware"

I will show u, shorty (as soon as I will be to post) what kind of errors messages I get, when I try to run the flash.
I have read all the topics and unfortunately iam still stuck...

Hope to get feedbacks from you
Talk to you soon.
Regards,
Sof

Offline

#2 2018-05-16 20:14:26

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: Hello Team

Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.

Offline

Board footer

Powered by FluxBB