Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
#1 2018-05-21 08:40:21
- xrayshaggy
- Contributor
- Registered: 2018-05-21
- Posts: 1
Hi From Brisbane
Hi Everyone;
I'm very much a noob here, and totally out of my element with all this programming stuff. Was bought a proxmark3 by my apartment complex to make access keys for everyone without having to pay $150 per card to the installer for any unit that wants more than a single card per unit.
I have managed to get as far as installing the Proxmark software so it displays under the device manager as "proxmark3 (COM4)", and installed ProxSmart (i think), but a little lost from there.
Cheers
Offline
#2 2018-05-21 10:13:26
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Hi From Brisbane
Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.
Offline
Pages: 1
Topic closed