Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
- Index
- » Introductions
- » Hello
Pages: 1
Topic closed
#1 2018-07-05 21:09:01
- crazyquark
- Contributor
- Registered: 2018-07-05
- Posts: 5
Hello
I am new here. I've been playing with RFID and NFC for a couple of years using inexpensive Chinese reader/writers.
I finally got a Proxmark3 Easy and I am testing it out.
I've managed to copy a 125Khz fob and dump an iClass HID card but I was not able to write the dump to some iClass cards I bought because they seem to be not recognized by PM3(they are marked as HID iClass DL... saw some posts about this)
Offline
#2 2018-07-05 21:48:37
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Hello
Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.
Offline
Pages: 1
Topic closed
- Index
- » Introductions
- » Hello