Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
#1 2018-10-03 12:42:14
- crookie1969
- Contributor
- Registered: 2018-10-03
- Posts: 1
Just an intro to say hi..
Hi all, I'm new to this and seeking all sorts of info on set up, flashing and everything else. I attended at a redhat type of event/conference and learned a little about these so decided to take a plunge. I purchased a proxmark3 V3 easy with 512Kb of memory and now I'm not sure on how to do the rest. Hopefully I will get a bit of insight on these devices from reading these pages. In the meantime, are there any user/support groups that get together. I'm in Victoria, Australia.
Offline
#2 2018-10-03 18:53:52
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Just an intro to say hi..
Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.
Offline
Pages: 1
Topic closed