Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Hey all,
i have a couple of dogs that have been chipped, but I'm not entirely sure what type of pet tag they got. They came from different rescue groups, so I know they used different company products. I am assuming they are FDX-B 134KHz, but not sure. Any advice on how to find out? A generic lf read doesn't seem to find anything.
I'm running PM3 RDV4 with the Proxgrind long range reader set F=134 Q=7 and get the following on one of the dogs
[usb] pm3 --> lf fdx read
[#] LF signal properties:
[#] high..........146
[#] low...........114
[#] mean..........128
[#] amplitude.....18
[#] is Noise......No
[#] THRESHOLD noise amplitude......8
[#] DEBUG: (setClockGrid) clear settings
[#] DEBUG (askdemod_ext) clk 32, beststart 0, amp 0
[#] DEBUG DetectCleanAskWave: peaks (200) 1
[#] DEBUG: (askdemod_ext) Weak wave detected: startIdx 0
[#] DEBUG: no data or error found 312, clock: 32
[#] DEBUG: Error - FDX-B ASKbiphaseDemod failed
In that output my lf divisor is 95, but I've also tried 88 with similar results.
suggestions appreciated
Offline
Pages: 1