Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
#1 2020-06-27 09:20:09
- Taha
- Contributor
- Registered: 2020-06-24
- Posts: 12
Hello dear friends,
Its Antonio from Spain, I have a Proxmark3 and I'm getting familiar with it. I have sth in mind which I want to see the possibility of its implementation or it has already been done. I know it's an introduction, but Iceman can you help me out here. I want to eliminate the need for having a PC (OS-based platforms and requirement for a software-client) as the Proxmark's controller. I want to use an STM Microcontroller as the controller of proxmark3, sending and receiving commands over USB to Serial, but the commands as I sniffed the USB port are coded into hex values, and the response as well. I did not find any material regarding the coding of the commands and decoding of the returned data.
Offline
#2 2020-06-27 14:21:06
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Hello dear friends,
Welcome and thank you for reading the introduction post http://www.proxmark.org/forum/viewtopic.php?id=1125.
Your access rights has been updated.
Offline
Pages: 1
Topic closed