Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2014-02-18 11:52:39

asper
Contributor
Registered: 2008-08-24
Posts: 1,409

T55x7 and EM4100 TOOL

Thanks to TissuePeanut here is an excel tool that is able to convert an EM4100 HEX ID (40 Bits) [or UNIQUE HEX ID] to blocks you need to write to a T55x7 hardware emulator; the tool is really easy:

1 - enter the EM4100 HEX ID in the appropriate field;
2 - modify hardware emulator parameters (options) by the drop-down coloured fields;
3 - copy/paste the HEX block0, block1 and block2 value to your T55x7 programmer !

Here is a screenshot:
F6UtIFW.png

I also added a "Descramble" sheet with EM4100 descrambling patterns we found here in the forum (look if your card printed values are here!):
ZPBJuee.png

Last sheet has the ATA5567 PDF manual embedded (just doubleclick on it to open):
dCVbBJY.png

You can download it HERE.

Last edited by asper (2014-10-14 13:09:44)

Offline

#2 2014-03-17 21:36:06

asper
Contributor
Registered: 2008-08-24
Posts: 1,409

Re: T55x7 and EM4100 TOOL

Added UNIQUE support (thanks to friend midnite!).

Last edited by asper (2014-03-17 21:36:13)

Offline

#3 2014-10-14 13:10:04

asper
Contributor
Registered: 2008-08-24
Posts: 1,409

Re: T55x7 and EM4100 TOOL

Added more descrambling patterns.

Offline

#4 2015-04-24 20:10:33

holiman
Contributor
Registered: 2013-05-03
Posts: 566

Re: T55x7 and EM4100 TOOL

Oh, that looks nice. Asper, could you send it to me ? I'd like to rip it off into a tool I'm working on...

Offline

#5 2015-07-13 16:43:39

Lenox
Contributor
Registered: 2015-01-29
Posts: 42

Re: T55x7 and EM4100 TOOL

The link is not available now.
Asper, can you upload it again?
Thanks

Last edited by Lenox (2015-07-13 17:38:55)

Offline

#6 2015-07-28 10:57:32

rbubba1911
Contributor
Registered: 2014-08-14
Posts: 86

Re: T55x7 and EM4100 TOOL

Hi,

From the xls I receive (thanks asper) , I made an OpenOffice version, with working macro.

you don't need no more Windows/Office2013 smile

Regards

Last edited by rbubba1911 (2015-08-19 15:46:55)

Offline

#7 2015-10-24 20:04:01

Danz
Contributor
From: Dubai
Registered: 2015-10-24
Posts: 98

Re: T55x7 and EM4100 TOOL

Can I get copy ?

link not working .. thanks smile

Offline

#8 2015-10-29 14:45:32

yikatong
Contributor
Registered: 2015-10-26
Posts: 11

Re: T55x7 and EM4100 TOOL

Can I get a copy too?
The link seems to be outdated.

Offline

Board footer

Powered by FluxBB