Ordering of new proxmarks

rule · 2008-08-21 00:40:37

Who would be interested in ordering a proxmark?

newseal · 2008-08-24 18:32:05

hello, roel
(sorry my english,)

I am in contact with a company of achievement for PCB production card prowmarkii3 (I asked a quote)
if you want I can send you information on costs.

rule · 2008-08-25 11:24:47

newseal wrote:

hello, roel
(sorry my english,)

I am in contact with a company of achievement for PCB production card prowmarkii3 (I asked a quote)
if you want I can send you information on costs.

That would be nice, I'm sure there are more people here that want to order one, maybe it will be cheaper if you order more of them. I hope you can keep us informed when you know more about the price.

newseal · 2008-08-25 14:07:19

hi, all

now, I just put a file that resume the price for an estimate of 2 PROXmarkII3.
not easy to organize an order together.
several question:
- just PCBs
- buy components and send.
- allow any company to manage.

For my part I think soon be able to achieve. thank you for informing me if I do foresee an order together.
it must be possible to send two different address command.
But it takes a single account to pay.
There are plenty of questions, from the moment where we think for everyone.

thanks

look in UPLOAD File
Proxmark community files

Last edited by newseal (2008-09-29 17:59:33)

tr4sh · 2008-08-28 13:25:02

Hi,
i'm interested in ordering.

newseal · 2008-09-03 12:30:20

hi all,
In a first time I order 2 cards by a company to make test operation (card pcb ,assemble, component smd).
I do not know if welding silk even a good idea with quartz, FPGA, ....

dreyercito · 2008-09-21 11:36:52

I would also be very interested!

djmanning · 2008-09-22 02:00:46

I currently have an empty board but the complete order of parts has been difficult. I think some of the parts have been obsoleted making the construction of the current design harder to put achieve.

If anyone has parts or knows of a house that can get the parts and solder, I'm very interested.

Thanks,

Don

tr4sh · 2008-09-30 13:16:44

hi,
how does it looks like?
how long will it take to have devices ready? i know it takes some time (pcb, components, ...). all i want is some info about progress....
thanks.

feebmc · 2008-10-04 08:32:39

I am very keen on purchasing one , if anyone is making any please let me know .

edo512 · 2008-10-07 17:16:42

I'd be interested too, definitely, let me know if you make any progress!

d18c7db · 2008-10-09 05:59:01

So what's the latest on this? I see there's a lot of interest (including me).
Is this still going ahead? What's the estimated price, and is this order for the PCB only, a kit or a fully assembbled proxmark?

Tigereye · 2008-10-09 19:47:56

+1 unit for me, and likely +1 for a friend of mine.

Just let me know where to send the money.

--TE

theqlabs · 2008-10-11 04:11:03

Hi guys, new here... I posted this on another thread but I might as well shoot it here too.

I have like 90 Proxmark3 PCBs, I've been getting 10-20 made and then selling them. I gave away A LOT of the pcb's to people I thought would benefit from them (which most of them have) and they contributed a lot back to the community.

I created an updated EXCEL list with all WORKING part numbers for the proxmark3. The first time I went to order these like 20% of the numbers were obsoleted by Digikey / Mouser / etc.

Presents for you: http://theqlabs.com/Proxmark3_Updated.xls

Don't worry about all the colors and stuff, the info there is good. That's all you need. I ordered most things from Digikey and the rest from Mouser.

I am willing to help anyone out who has questions getting orders done, placement houses, PCB's made, soldering SMD 0603, programming / flashing whatever.

I will hopefully check this forum occasionally, if not e-mail me:

q@theqlabs.com

Cheers,

oh btw: my boards were made with black soldermask, they look so much sexier! hehe

Last edited by theqlabs (2008-10-11 04:29:53)

shinechou · 2008-10-20 03:53:48

Dear Roel, what's going on? I'm very interested in it and want to buy 2 pieces of ProxMark III, how to buy it? thx for ur nice work!

d18c7db · 2008-10-28 02:13:37

shinechou you should probably email him direct at the address listed in his post. He might be currently on a business trip so don't worry if you don't get a response straight away.

Dennyxiao · 2008-11-01 11:24:21

I'd like to get one .

salami1_1 · 2008-11-04 07:53:26

I'm interested too.. if necessary I have some contacts in china to for manufacturing..
I'm quite busy with UNI in Australia atm but if needed I can inquire for manufacturing as I use to have stuff manufactured all the time when I still was selling gsm service hardware...

B.r.

salami1_1 · 2008-11-19 08:03:22

havent got a lot of replies yet.. seems some of the companies are bit 'scared' of the complexity of the device (that in relation with the low quantities).
I'll keep looking for some manufactures but I think I should be looking for smaller companies instead of the bigger ones with big product lines.

Roel you have any news from other people for manufacturing?

B.r.

rule · 2008-11-19 11:07:51

salami1_1 wrote:

havent got a lot of replies yet.. seems some of the companies are bit 'scared' of the complexity of the device (that in relation with the low quantities).
I'll keep looking for some manufactures but I think I should be looking for smaller companies instead of the bigger ones with big product lines.
Roel you have any news from other people for manufacturing?
B.r.

SummoningDark posted in this topic some useful information about ordering the PCB.
http://www.proxmark.org/forum/viewtopic.php?id=76

right now, I only have the one I'm working on and another partially populated. but it would not be hard to place a re-order with the board house. They cost me $66 each with a minimum of 3 and ~$15 shipping. So I could get you one (or 3) for about $213 + shipping. Or you could place the order yourself, and not have to wait for me. I get them made by Advanced Circuits, www.4pcb.com with the $66 special for 4 layers. You can upload the gerbers from the zip file online and order with a credit card. quick and painless. They are also very helpful if you have questions or problems. And if you are a student they will waive the minimum of 3, although I would recommend getting at least two, since it is easy to pull up pads if you do the surface mount parts by hand. (epically if you use solder wick to clean things up, be VERY careful with that). and judging from my problems, stay away from the at91sam7s512. maybe we can get a bunch of people together to make a bulk buy of boards, then no one person has to buy more than they need($66 is cheap for a 4-layer, but it's still not free)
good luck

There are more parties available that can solder the unit for you. The PCB is the hardest peace to order. But since this company makes them really cheap this would be maybe interesting for a large order. Maybe someone wants to jump into this. It seems there is quite some demand for this device.

Cheers,

Roel

kazola · 2008-11-20 23:45:56

I'm also interested!
I'm not buying it for myself. It is for my university so you can inflate something the price if you want to

n0t · 2008-11-24 21:05:30

I'm interested in buying boards if anyone is selling contact me.
Thx

sh0rt · 2008-12-01 22:21:19

Hi Everybody!

i saw many people would like oreder pcb's. I paid the first high qualty manufacturing price (~600$) when i made my own proxmark. Now i can reorder many as i want.
I made a little temporary shop, you can buy what you want. I have some spare parts on the shop.
The postage is a standard international air mail (this was the lowest price)

The url is: http://shop.vallum.hu/

brokentesting · 2008-12-02 07:49:02

ROEL,
SummoningDark,
d18c7db,

SummoningDark has posted that we should stay away from the at91sam7s512,
but d18c7db has made some fixes and uploaded a file in the " Files " section of this website, * I THINK * Correcting this.... Is this correct?

Sh0rt, your website,

 http://shop.vallum.hu/catalog/

shows you are providing the boards without the components.

Are you using d18c7db's updated .zip file ?

Roel, SummoningDark, & d18c7db, I'd like to thank you all for efforts.

You guys are GREAT!

Please keep up the good work

Last edited by brokentesting (2008-12-02 07:49:54)

d18c7db · 2008-12-02 19:43:33

Just to clarify, my fix had nothing to do with the 512. The bug it addressed seemed to be in the original code and affected any ARM flavour when the "loread" command was used. This was due to the stack pointer being initialized to a low RAM address that fell within the BigBuff range.

I'm going to look at adding a color LCD to the board next, I think the best option is this which is a cheap Nokia, widely available color LCD, only requires 4 signal pins at 3.3v (serial connection) and someone has alreay written sample ARM code to drive it. Should be a breeze. I've ordered one off ebay for under $10 incl shipping, hopefully I'll get it before I go on holiday and I'll post pictures of the results. Ideally I should also add a couple more buttons to teh board to allow a simple menu system to be implemented but at the very least the LCD could be used for status messages and other simple output.

Last edited by d18c7db (2008-12-02 22:00:08)

proxcat · 2008-12-06 13:30:58

You can now pre-order fully functional boards here: http://proxmark3.com/.

brokentesting · 2008-12-09 11:36:19

d18c7db,

Sounds Great!

The work you posted on Flickr is EXCELLENT!

Please PM me your Email address, I have a couple of questions for you

d18c7db wrote:

Just to clarify, my fix had nothing to do with the 512. The bug it addressed seemed to be in the original code and affected any ARM flavour when the "loread" command was used. This was due to the stack pointer being initialized to a low RAM address that fell within the BigBuff range.
I'm going to look at adding a color LCD to the board next, I think the best option is this which is a cheap Nokia, widely available color LCD, only requires 4 signal pins at 3.3v (serial connection) and someone has alreay written sample ARM code to drive it. Should be a breeze. I've ordered one off ebay for under $10 incl shipping, hopefully I'll get it before I go on holiday and I'll post pictures of the results. Ideally I should also add a couple more buttons to teh board to allow a simple menu system to be implemented but at the very least the LCD could be used for status messages and other simple output.

d18c7db · 2008-12-09 19:36:47

Can't PM you when your email set to private. Anyway try me at hotmail...

Last edited by d18c7db (2008-12-09 19:38:26)

loncho · 2008-12-27 18:58:01

Sonce november I sent money to theQlabs who promised he had working proxmark units. Today is dec 27 an still he had no send me anything

I think I lose my money, I don´t know

Somebody knows theQlabs??

d18c7db · 2008-12-27 20:28:58

Yeah I got PCB's from Andrew (the Q Labs) but he's usually very busy. Keep emailing him and reminding him and you'll get your PCB.

rfider · 2009-01-04 13:43:13

is there anyone order PROXMARK III at http://proxmark3.com?

the page looks nice!

brokentesting · 2009-01-05 09:39:06

rfider,

Thats a cool name

TheQLabs, though he has had your $ since November, and I am assuming
no contact with you hence the reason why you posted.

http://www.proxmark.org/forum/viewtopic.php?pid=283#p283.

I see he has no problems posting, DAILY, to his Twitter Website.

https://m.twitter.com/theqlabs

Sh0rt,

Your Website:

http://shop.vallum.hu/catalog.

HAD all the components to build the Proxmark3, including the boards,
but now, *SUDDENLY*, all you are selling is the ARM256 chip....

Yes, the

 http://proxmark3.com.

seems more professional
and YES I did get a reply / response from whomever is running that site.
If I were the owner, I'd make sure I'd be in touch with those interested in
parting with $499 STARTING to get a professional Proxmark3.

Anyways, the only people I would trust at this point is the following:

d18c7db
SummoningDark
roel - Administrator

And NO I am not saying they are selling anything, but they have
provided us with EXCELLENT posts / threads/ information

Just my 2 cents.

Last edited by brokentesting (2009-01-05 09:41:39)

d18c7db · 2009-01-07 06:34:25

I suggest you keep trying Andrew from theqlabs, you should have some progress. I got some PCBs from him and I had similar problems where it took about a month for him to post them after I paid him. At the time he'd come down with a bug and also had to travel overseas so that delayed the whole transaction but he was responsive to emails and very apologetic.

For components why not use digikey.com as I did. I used the updated excel component list that theqlabs posted recently and fed that straight into digikey. Total cost of components as about $150 or so but you have to do your own soldering and you still need to get the PCB separately.

loncho · 2009-01-10 02:15:52

Thank you for your comments.
Qlabs has told me that is having troubles tunning the device, so I have not problem to wait him.
My problem is that I´m not in US and my country is very hard to order components from foreing countries. For that reason, he is going to send me all pcb and components and antenna also, all assembled.

So, let´s wait..... and then I´ll tell you

Thank you again for your comments

proxcat · 2009-01-10 23:44:31

Hey guys, this is jr from proxmark3.com. I don't take anyone's money until I have a board with their name on it. I ship the same or next day after payment is received. Feel free to send me any questions you have. My email is jr [2at2] proxmark3.com. Happy RFIDing.

Dennyxiao · 2009-01-14 08:35:20

Have orded ,still wating for the arrivalling.

z3nd0r2k · 2009-02-20 01:50:56

Hi there. I'm new around here I would like to know the price for a complete one, "if the price is right I will buy one two" and how much do i need to wait for it. Thank you

Last edited by z3nd0r2k (2009-02-20 01:54:53)

edo512 · 2009-02-20 11:31:15

proxcat wrote:

Hey guys, this is jr from proxmark3.com. I don't take anyone's money until I have a board with their name on it. I ship the same or next day after payment is received. Feel free to send me any questions you have. My email is jr [2at2] proxmark3.com. Happy RFIDing.

My 2 cents: just received a Proxmark3 from JR, everything went very smooth, the board looks nice, and excellent reactivity! Took a week between ordering & reception.

Ed

szymonunion · 2009-07-06 08:39:14

Hello,

I am interested in buying complete solution like Proxmark3, but $499 is too high price for me. Please let me know about other possibilities.

roel, d18c7db, SummoningDark - guys, you are doing gr8 things!

Last edited by szymonunion (2009-07-08 08:38:44)

Proxmark3 community

Announcement

#1 2008-08-21 00:40:37

Ordering of new proxmarks

#2 2008-08-24 18:32:05

Re: Ordering of new proxmarks

#3 2008-08-25 11:24:47

Re: Ordering of new proxmarks

#4 2008-08-25 14:07:19

Re: Ordering of new proxmarks

#5 2008-08-28 13:25:02

Re: Ordering of new proxmarks

#6 2008-09-03 12:30:20

Re: Ordering of new proxmarks

#7 2008-09-21 11:36:52

Re: Ordering of new proxmarks

#8 2008-09-22 02:00:46

Re: Ordering of new proxmarks

#9 2008-09-30 13:16:44

Re: Ordering of new proxmarks

#10 2008-10-04 08:32:39

Re: Ordering of new proxmarks

#11 2008-10-07 17:16:42

Re: Ordering of new proxmarks

#12 2008-10-09 05:59:01

Re: Ordering of new proxmarks

#13 2008-10-09 19:47:56

Re: Ordering of new proxmarks

#14 2008-10-11 04:11:03

Re: Ordering of new proxmarks

#15 2008-10-20 03:53:48

Re: Ordering of new proxmarks

#16 2008-10-28 02:13:37

Re: Ordering of new proxmarks

#17 2008-11-01 11:24:21

Re: Ordering of new proxmarks

#18 2008-11-04 07:53:26

Re: Ordering of new proxmarks

#19 2008-11-19 08:03:22

Re: Ordering of new proxmarks

#20 2008-11-19 11:07:51

Re: Ordering of new proxmarks

#21 2008-11-20 23:45:56

Re: Ordering of new proxmarks

#22 2008-11-24 21:05:30

Re: Ordering of new proxmarks

#23 2008-12-01 22:21:19

Re: Ordering of new proxmarks

#24 2008-12-02 07:49:02

Re: Ordering of new proxmarks

#25 2008-12-02 19:43:33

Re: Ordering of new proxmarks

#26 2008-12-06 13:30:58

Re: Ordering of new proxmarks

#27 2008-12-09 11:36:19

Re: Ordering of new proxmarks

#28 2008-12-09 19:36:47

Re: Ordering of new proxmarks

#29 2008-12-27 18:58:01

Re: Ordering of new proxmarks

#30 2008-12-27 20:28:58

Re: Ordering of new proxmarks

#31 2009-01-04 13:43:13

Re: Ordering of new proxmarks

#32 2009-01-05 09:39:06

Re: Ordering of new proxmarks

#33 2009-01-07 06:34:25

Re: Ordering of new proxmarks

#34 2009-01-10 02:15:52

Re: Ordering of new proxmarks

#35 2009-01-10 23:44:31

Re: Ordering of new proxmarks

#36 2009-01-14 08:35:20

Re: Ordering of new proxmarks

#37 2009-02-20 01:50:56

Re: Ordering of new proxmarks

#38 2009-02-20 11:31:15

Re: Ordering of new proxmarks

#39 2009-07-06 08:39:14

Re: Ordering of new proxmarks