Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2014-04-12 17:45:32

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

stange s50 card and keyA

If you look at the following reading of Block 0, the key is default,  but can't I see the KEYA in the sector or block3  read? 


proxmark3> hf mf rdsc 0 a ffffffffffff
--sector no:00 key type:00 key:ff ff ff ff ff ff

#db# READ SECTOR FINISHED
isOk:01
data:d6 55 9f e0 fc 08 04 00 23 56 23 56 22 11 ff ff
data:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

data:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
data:00 00 00 00 00 00 ff 07 80 69 ff ff ff ff ff ff
proxmark3> hf mf rdbl 3 a ffffffffffff
--block no:03 key type:00 key:ff ff ff ff ff ff
#db# READ BLOCK FINISHED
isOk:01 data:00 00 00 00 00 00 ff 07 80 69 ff ff ff ff ff ff
proxmark3>

Offline

#2 2014-04-13 02:57:30

marshmellow
Contributor
From: US
Registered: 2013-06-10
Posts: 2,302

Re: stange s50 card and keyA

that behavior is perfectly normal.  the sector trailer security prevents key A from ever being read.  (except when hacked)

Offline

Board footer

Powered by FluxBB