Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2014-08-07 05:23:37

ale88
Contributor
Registered: 2014-04-13
Posts: 10

I can´t write block 1 and 2 the access bit problem

I want to write block 1 and 2 but the access bit condition don`t allowed. Unfortunately, I too cannot change de access bit because is "none" to write. The access bit is E78961. The card is a NXP MIFARE CLASSIC 1k | 2k Plus SL1. This access bit is come to default in the card.

LOlWgsI.png


The data of the block 1 and 2 change day a day when i travel, but I can´t write with proxmark3. is there any way to write these blocks?




Thanks...

Offline

#2 2014-08-07 06:07:00

piwi
Contributor
Registered: 2013-06-04
Posts: 704

Re: I can´t write block 1 and 2 the access bit problem

Sure, you have given the answer already with your screenshot: you can use the decrement command to change these blocks. ...but this is probably not what you want to achieve...

Offline

#3 2014-08-07 06:26:01

ale88
Contributor
Registered: 2014-04-13
Posts: 10

Re: I can´t write block 1 and 2 the access bit problem

Sure, I want to increment. In the same column say decrement tranfer and restore, why say restore? Can I restore that block with some special command?

Thanks for your help piwi...

Offline

#4 2014-08-07 06:30:42

asper
Contributor
Registered: 2008-08-24
Posts: 1,409

Re: I can´t write block 1 and 2 the access bit problem

He clearly wants to fraud so i think he should study mifare pdfs before asking any other questions.

Offline

#5 2014-08-07 10:29:23

piwi
Contributor
Registered: 2013-06-04
Posts: 704

Re: I can´t write block 1 and 2 the access bit problem

@asper: absolutely! I didn't put it that blunt, but meant the same...

Offline

Board footer

Powered by FluxBB