Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
This is a new LF tag, is none of HID, indala, em. i am trying to decode/clone it. anyone help ? thanks.
proxmark3> lf search
#db# buffer samples: aa 86 66 51 3a 27 1a 0d ...
Reading 20000 samples
Done!
Checking for known tags:
Using Clock: 32 - Invert: 0 - Bits Found: 400
ASK/Manchester decoded bitstream:
0000000000000000
0110011011000000
1111110011110010
0000000000000000
0000000000000000
0110011011000000
1111110011110010
0000000000000000
0000000000000000
0110011011000000
1111110011110010
0000000000000000
0000000000000000
0110011011000000
1111110011110010
0000000000000000
0000000000000000
0110011011000000
1111110011110010
0000000000000000
0000000000000000
0110011011000000
1111110011110010
0000000000000000
0000000000000000
Recovered 565 raw bits, expected: 625
worst metric (0=best..7=worst): 8 at pos 16
UID=0000000000000000000000000000000001000100100000000001000001001000 (044801048)
Occurrences: 1 (expected 7)
proxmark3>
https://www.sendspace.com/file/mn7bdd
https://www.sendspace.com/file/h5c5k6
Offline
is there anything printed on the tag? looks like you got 64 repeating bits.
Offline
nevermind - i see this is the same tag we were talking about in http://www.proxmark.org/forum/viewtopic.php?id=2216&p=2. thanks for making a new thread and keeping that thread on topic.
printed ID: 000066c0
I'm looking at the trace now.
Offline
joe wrote:marshmellow wrote:should be possible. yes just need to program blocks 1 and 2 and set the config block to manchester RF/32 and transmit only 2 blocks. (check the datasheet.)
Thanks, I will try that,
lf t55xx writeblock fcf200000 1
lf t55xx writeblock 000066c0 2
What about block 0 ?Just for your info, the cloned card can't work.
what did you mean by can't work?
what block 0 did you try?
Offline
lf t55xx writeblock fcd200000 1
appears to be a typo.
Offline
oop.. will try it again... thanks.
Offline
what value should i write on block 0 ?
Offline
I'm not at my PC, but if you look at the first post in the sticky thread here in lf, you'll find the config block settings for the ata5577. You need a data rate of rf/32 and manchester modulation and you want 2 blocks (64 bits) output. No other settings apply.
Offline
The cloned card results here. i guess it should work. any idea ?
Checking for known tags:
Using Clock: 64 - Invert: 0 - Bits Found: 312
ASK/Manchester decoded bitstream:
0000000000000000
0000011001101100
0000111111001111
0010000000000000
0000000000000000
0000011001101100
0000111111001111
0010000000000000
0000000000000000
0000011001101100
0000111111001111
0010000000000000
0000000000000000
0000011001101100
0000111111001111
0010000000000000
0000000000000000
0000011001101100
0000111111001111
Recovered 520 raw bits, expected: 625
worst metric (0=best..7=worst): 8 at pos 244
nothing to wait for
Recovered 520 raw bits, expected: 625
worst metric (0=best..7=worst): 8 at pos 244
nothing to wait for
No Known Tags Found!
proxmark3>
Offline
It might work but your clock is wrong
Offline
A good way to make sure your Block 0 is correct, do a "data plot" after reading/sampling.
Then compare both traces.
Offline
look like similar, but not exactly the same.
Offline
Thanks, app_01,
now it looks perfect, the traces are same..
Checking for known tags:
Using Clock: 32 - Invert: 0 - Bits Found: 400
ASK/Manchester decoded bitstream:
0000000000000000
0000000000110011
0110000001111110
0111100100000000
0000000000000000
0000000000110011
0110000001111110
Offline
congrats!
Offline
Pages: 1