Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#151 2015-06-16 03:28:02

lime1
Contributor
Registered: 2015-04-17
Posts: 26

Re: Hacking on Farpointe/Pyramid 26 bit, need encoding help

Removed

Last edited by lime1 (2015-07-20 12:22:27)

Offline

#152 2015-06-25 21:43:37

hkplus
Contributor
Registered: 2015-01-07
Posts: 127

Re: Hacking on Farpointe/Pyramid 26 bit, need encoding help

lime1 wrote:
iceman wrote:

If you feel the need for it, you are much welcome to add it to the source code.

Would anyone be willing to add the code for $200?  Or show me how to clone manually for $200?

You can contact me at: gm121@hotmail.com

Thanks

I could just clone or send you a sample tag with any number you want on it.  I use custom made programming software to make tags.

Last edited by hkplus (2015-06-25 21:45:18)

Offline

#153 2015-07-16 14:43:59

lime1
Contributor
Registered: 2015-04-17
Posts: 26

Re: Hacking on Farpointe/Pyramid 26 bit, need encoding help

Removed

Last edited by lime1 (2015-07-20 12:22:01)

Offline

#154 2015-07-20 10:36:00

lime1
Contributor
Registered: 2015-04-17
Posts: 26

Re: Hacking on Farpointe/Pyramid 26 bit, need encoding help

Thank you to everyone who worked on this and solved the checksum issue, updated the proxmark code and those who helped me.  I finally worked out how to clone this card.

I have a question though that I hope someone can help me with:
I realize for the 26 bit card discussed in this thread, block 0 is programmed as 80107000.  How about for the 90 bit card? 

I have checked the thread "T55x7 and Tags Emulation" (http://www.proxmark.org/forum/viewtopic.php?id=1767) but can't understand which bits of the block 0 would need to be changed between a Pyramid 26 bit & 90 bit tag?

Last edited by lime1 (2015-07-21 06:25:00)

Offline

#155 2015-07-22 09:15:38

lime1
Contributor
Registered: 2015-04-17
Posts: 26

Re: Hacking on Farpointe/Pyramid 26 bit, need encoding help

lime1 wrote:

I realize for the 26 bit card discussed in this thread, block 0 is programmed as 80107000.  How about for the 90 bit card?

Having looked into this more, I think I confused the bit length with clock rate.  So it seems block 0 doesn't need to be changed for different bit lengths - it remains at 80107000. 

Doing a lf search for the original card & my t55xx cloned card shows the same results:

[== Undefined ==]
Pyramid ID Found - BitLength: 90 -unknown BitLength- (38xxx), Raw: 0001c10101013
bxxxxxxxxxxxxxxxxxx
Checksum xx passed

Valid Pyramid ID Found!

Offline

#156 2015-07-22 10:10:28

iceman
Administrator
Registered: 2013-04-25
Posts: 9,491
Website

Re: Hacking on Farpointe/Pyramid 26 bit, need encoding help

usually you set number of blocks that the t55xx will repeat as output in the config block.  But if its working for you, then don't.

Offline

#157 2015-10-26 05:13:08

hkplus
Contributor
Registered: 2015-01-07
Posts: 127

Re: Hacking on Farpointe/Pyramid 26 bit, need encoding help

lime1 wrote:

Thank you to everyone who worked on this and solved the checksum issue, updated the proxmark code and those who helped me.  I finally worked out how to clone this card.

I have a question though that I hope someone can help me with:
I realize for the 26 bit card discussed in this thread, block 0 is programmed as 80107000.  How about for the 90 bit card? 

I have checked the thread "T55x7 and Tags Emulation" (http://www.proxmark.org/forum/viewtopic.php?id=1767) but can't understand which bits of the block 0 would need to be changed between a Pyramid 26 bit & 90 bit tag?

With Wiegand, there is no such thing as a Pyramid 90 bit tag.  Wiegand formats in Pyramid go to a max of 64 bits.  If there are more bits than this, then you might be looking at an ABA emulation tag (track II magstripe data).

Last edited by hkplus (2015-10-26 05:16:01)

Offline

#158 2015-11-25 13:48:00

trazodone
Contributor
Registered: 2015-11-25
Posts: 50

Re: Hacking on Farpointe/Pyramid 26 bit, need encoding help

hkplus wrote:
lime1 wrote:
iceman wrote:

If you feel the need for it, you are much welcome to add it to the source code.

Would anyone be willing to add the code for $200?  Or show me how to clone manually for $200?

You can contact me at: gm121@hotmail.com

Thanks

I could just clone or send you a sample tag with any number you want on it.  I use custom made programming software to make tags.

Hello,

I am interested to your custom made programming software. I have Pyramid information read from key fob as below details
Pyramid ID Found - BitLength: 26, FC: 150, Card: 194 - Wiegand: 12c0184, Raw: 00010101010101010101015261070889
Checksum 89 passed

Is it possible to clone using your software?
Answer here or send me email hydrorigs@outlook.com will be appreciated.

Thanks

Offline

#159 2015-11-25 15:19:45

hkplus
Contributor
Registered: 2015-01-07
Posts: 127

Re: Hacking on Farpointe/Pyramid 26 bit, need encoding help

trazodone wrote:
hkplus wrote:
lime1 wrote:

Would anyone be willing to add the code for $200?  Or show me how to clone manually for $200?

You can contact me at: gm121@hotmail.com

Thanks

I could just clone or send you a sample tag with any number you want on it.  I use custom made programming software to make tags.

Hello,

I am interested to your custom made programming software. I have Pyramid information read from key fob as below details
Pyramid ID Found - BitLength: 26, FC: 150, Card: 194 - Wiegand: 12c0184, Raw: 00010101010101010101015261070889
Checksum 89 passed

Is it possible to clone using your software?
Answer here or send me email hydrorigs@outlook.com will be appreciated.

Thanks

Yes not a problem.

Offline

#160 2015-11-26 05:50:20

trazodone
Contributor
Registered: 2015-11-25
Posts: 50

Re: Hacking on Farpointe/Pyramid 26 bit, need encoding help

Hello hkplus,

Which reader to use with your custom made software?
Is it possible if I can have your software? Are you comfortable to share or sell some?

Thank you smile

Offline

#161 2015-11-26 09:15:35

hkplus
Contributor
Registered: 2015-01-07
Posts: 127

Re: Hacking on Farpointe/Pyramid 26 bit, need encoding help

I don't have the ability to provide this software unfortunately.

Offline

Board footer

Powered by FluxBB