Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2015-08-16 19:57:48
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Modify stand-alone mode for LF SEARCH.
I wonder how much effort it would be to make the standalone mode using the "LF SEARCH" ..
and then in a later step, maybe send the found signal back into "LF SIM"...
Offline
#2 2015-10-19 23:17:56
- waltaugust
- Contributor
- Registered: 2012-03-12
- Posts: 15
Re: Modify stand-alone mode for LF SEARCH.
This would be a great addition. Hope someone can do it.
Offline
#3 2015-10-20 18:57:30
- marshmellow
- Contributor
- From: US
- Registered: 2013-06-10
- Posts: 2,302
Re: Modify stand-alone mode for LF SEARCH.
this would be slow and inefficient with the current code if it was placed in the arm. it would require a bit of a rewrite and i'm afraid take up a bit more of the arm's memory space (which is why it was built in the client) and in my opinion the arm memory is better left open for crypto functions, new communication protocols, and larger traces.
it could be done, but it is not on my todo list. 
Last edited by marshmellow (2015-10-20 18:58:02)
Offline