Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2015-09-26 04:25:25

ericlam2728
Contributor
Registered: 2015-09-26
Posts: 34
Website

[solved] GProx 2 Cloning

Hello,

I'm eric and I have fallen in love with this RFID Community.

I recently got my proxmark3 in the mail and have been dying to use it. I've read as much as I can and i'm completely stuck now.

I have a Gprox2 fob and i'm trying to clone it to a tx5577 card so i can tape it to the back of my phone and enter my apartment.

I've looked everywhere and can't figure it out. can anyone help me?

Offline

#2 2015-09-26 04:41:47

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: [solved] GProx 2 Cloning

Offline

#3 2015-09-26 10:49:33

ericlam2728
Contributor
Registered: 2015-09-26
Posts: 34
Website

Re: [solved] GProx 2 Cloning

So from what i gather, use the data demod command to get the hex code...?  from the gprox card. Then seperate it and use the tx5577 write function to write it to the four blocks on the card?

Offline

#4 2015-09-26 10:55:22

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: [solved] GProx 2 Cloning

sounds like a plan to me.

Offline

#5 2015-09-29 04:47:04

ericlam2728
Contributor
Registered: 2015-09-26
Posts: 34
Website

Re: [solved] GProx 2 Cloning

so after running that command I got

G-Prox-II Found: FmtLen 26, FC 10, Card 45952         
Raw: fb9436194e511670392e5394 


How do i split this into the blocks? i read the threads and I thought you just break that into four parts but that doesnt seem to work. Thank you again for helping out

Offline

#6 2015-09-29 06:52:01

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: [solved] GProx 2 Cloning

if you read the threads I linked to, the last one tells you what to do
In short you need a config block and then you split your raw bytes into three blocks.

[b0] config
[b1] fb 94 36 19 
[b2] 4e 51 16 70
[b3] 39 2e 53 94 

Offline

#7 2015-09-29 20:08:50

ericlam2728
Contributor
Registered: 2015-09-26
Posts: 34
Website

Re: [solved] GProx 2 Cloning

Thank you iceman for the help smile i got it to work!

Last edited by ericlam2728 (2018-03-23 00:14:05)

Offline

#8 2015-09-29 20:24:55

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: [solved] GProx 2 Cloning

If you know what modulation and submodulation the tag you want to clone to t55x7, then its a question of looking on the datasheet..    There is an excel sheet which helps out on the courtisy of @asper

Offline

#9 2016-05-22 13:15:43

ntk
Contributor
Registered: 2015-05-24
Posts: 701

Re: [solved] GProx 2 Cloning

@ericlam2728
@jeff1551

I am learning from this thread would you pls possibly share a good trace and pic how it looks like.
or here.
patienceisavirtue102@gmail.com

infos:
looks like we dealing with
ASk
ASK biphase
3 data blocks
RF/32, RF/50 or RF/64


Is this the Chubb Key some talking about?

Last edited by ntk (2016-05-22 13:20:40)

Offline

#10 2017-10-22 06:18:11

Heru
Contributor
Registered: 2017-10-08
Posts: 78

Re: [solved] GProx 2 Cloning

ericlam2728 wrote:

so after running that command I got

G-Prox-II Found: FmtLen 26, FC 10, Card 45952         
Raw: fb9436194e511670392e5394 


How do i split this into the blocks? i read the threads and I thought you just break that into four parts but that doesnt seem to work. Thank you again for helping out

Hi , what commands you run to get this raw block?

Thanks for your help

Offline

#11 2017-10-24 17:33:42

Blackhawks
Contributor
Registered: 2017-09-20
Posts: 21

Re: [solved] GProx 2 Cloning

iceman wrote:

If you know what modulation and submodulation the tag you want to clone to t55x7, then its a question of looking on the datasheet..    There is an excel sheet which helps out on the courtisy of @asper

Where can I get this spreadsheet at?

B.

Offline

Board footer

Powered by FluxBB